toturial for gmux using svod 3

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • String2016
    Badcaps Legend
    • Nov 2015
    • 2229
    • philippines

    #1

    toturial for gmux using svod 3

    Does anyone have a toturial for jtag gmux using svod 3 to disabled permanently macbook 2010 graphics?please share
  • b4rdock
    Senior Member
    • Jun 2017
    • 95
    • usa

    #2
    Re: toturial for gmux using svod 3

    u have the jed files size is 152kb or 1,241 ?

    Comment

    • MLB
      New Member
      • Sep 2018
      • 9
      • Brasil

      #3
      Re: toturial for gmux using svod 3

      Hello, maybe this will help you if you are still interested!

      https://www.youtube.com/watch?v=b10u...form%C3%A1tica

      Comment

      Related Topics

      Collapse

      • Whale linguini
        General Question(s) & Question About USB Jtag u-Link NT
        by Whale linguini
        I'm not sure if I am posting this in the right spot, I don't have any question or anything specific to one board. I am *kinda* starting out with this kind of work. I have been IT in one role or another for my job the last 30 years, and I am familiar enough with basic board stuff generally speaking. So, I dunno for example if someone told me to find a uart header, or flash some generic tsop8 something, etc I understand that kind of stuff. Point being, I'm not 100% clueless. I just don't have the specific knowledge when it comes to some of these more advanced repairs. I actually have spent the last...
        07-26-2024, 02:12 PM
      • Document Archive
        Apple MacBook Air 13'' LATE 2010 820-2838 820-2838-A 820-2838-B Boardview
        by Document Archive
        Apple MacBook Air 13'' LATE 2010 820-2838 820-2838-A 820-2838-B Boardview...
        10-22-2024, 02:37 AM
      • koko16
        A1297 820-2914-b gmux lfxp2 5e
        by koko16
        Please if anyone has an original GMUX jed file (LFXP2 5E) with discrete graphics extracted from a Macbook A1297 820-2914-B.
        Or even a functional GMUX jed UMA tested on this model.
        Thanks
        10-28-2022, 02:26 AM
      • coolshrimp
        T14s - MEC-1663 - Jtag - Pinout - Bios Password Removal
        by coolshrimp
        Here is all the info you should need to remove bios password from your same model or one with an MEC-Chip and also write back the config data

        T14s - MEC-1663 - Jtag - Pinout - Bios Password Removal

        See Diagram for Wiring.

        Use MEC-1633#ISP on your RT809h
        This is same Jtag pinout and method for T490S/X390
        (But your R/W 10K Resistor Location May In a Different Location)


        MEC-Chips Store Bios Password In a Secure Un-Editable Area

        Following steps clear that secure area to re-initialize itself to default (Blank)
        ...
        10-24-2022, 12:18 AM
      • avneeshshrotria
        Mac Pro 5,1 2010 CPU Tray Damage
        by avneeshshrotria
        Hey guys ,

        Need assistance with a Mac Pro 2010 5,1 single cpu , cpu tray .
        Ive bought the computer used , it’s really been through a hard time.
        Someone has managed to pull components off the bottom side of the cpu tray!!!

        I need assistance in identifying the components and the values of
        1. CG410(missing)
        2. Q2400(TWN. Marking on it) , Q2450(TWN. Marking on it) (this marking does not correspond to any specific IC as far as I can tell , need help to identify!l )
        3. Q2120 (missing) ,
        4. R2444(missing)

        Im attaching a couple...
        04-11-2024, 02:20 AM
      • Loading...
      • No more items.
      Working...