Does anyone have a toturial for jtag gmux using svod 3 to disabled permanently macbook 2010 graphics?please share
							
						
					toturial for gmux using svod 3
				
					Collapse
				
			
		
	X
- 
	
	
	
	
		
	
	
	
		
	
	
	
	
	
	
	
	
	Tags: None
- 
	
	
	
	
		
	
	
	
		
	
		
			
				
	
	
	
	
	
	
	
	
	
 Re: toturial for gmux using svod 3
 
 Hello, maybe this will help you if you are still interested!
 
 https://www.youtube.com/watch?v=b10u...form%C3%A1ticaComment
Related Topics
				
					Collapse
				
			
		
	- 
	
	
		
	
	
	
	
	
		
			I'm not sure if I am posting this in the right spot, I don't have any question or anything specific to one board. I am *kinda* starting out with this kind of work. I have been IT in one role or another for my job the last 30 years, and I am familiar enough with basic board stuff generally speaking. So, I dunno for example if someone told me to find a uart header, or flash some generic tsop8 something, etc I understand that kind of stuff. Point being, I'm not 100% clueless. I just don't have the specific knowledge when it comes to some of these more advanced repairs. I actually have spent the last...
- 
	
	
		
	
	
	
	
	
		
			Apple MacBook Air 13'' LATE 2010 820-2838 820-2838-A 820-2838-B Boardview...- 
							Channel: Schematics and Boardviews
 10-22-2024, 02:37 AM
- 
							
- 
	
	
		
	
	
	
	
	
		
			by koko16Please if anyone has an original GMUX jed file (LFXP2 5E) with discrete graphics extracted from a Macbook A1297 820-2914-B.
 Or even a functional GMUX jed UMA tested on this model.
 Thanks- 
							Channel: BIOS Requests ONLY!
 
- 
							
- 
	
	
		
	
	
	
	
	
		
			by coolshrimpHere is all the info you should need to remove bios password from your same model or one with an MEC-Chip and also write back the config data
 
 T14s - MEC-1663 - Jtag - Pinout - Bios Password Removal
 
 See Diagram for Wiring.
 
 Use MEC-1633#ISP on your RT809h
 This is same Jtag pinout and method for T490S/X390
 (But your R/W 10K Resistor Location May In a Different Location)
 
 
 MEC-Chips Store Bios Password In a Secure Un-Editable Area
 
 Following steps clear that secure area to re-initialize itself to default (Blank)
 ...- 
							Channel: BIOS Requests ONLY!
 
- 
							
- 
	
	
		
	
	
	
	
	
		
			Hey guys ,
 
 Need assistance with a Mac Pro 2010 5,1 single cpu , cpu tray .
 Ive bought the computer used , it’s really been through a hard time.
 Someone has managed to pull components off the bottom side of the cpu tray!!!
 
 I need assistance in identifying the components and the values of
 1. CG410(missing)
 2. Q2400(TWN. Marking on it) , Q2450(TWN. Marking on it) (this marking does not correspond to any specific IC as far as I can tell , need help to identify!l )
 3. Q2120 (missing) ,
 4. R2444(missing)
 
 Im attaching a couple...
- Loading...
- No more items.
Comment