Mac Pro 5,1 2010 CPU Tray Damage

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • avneeshshrotria
    Member
    • Oct 2019
    • 24
    • India
    #1

    Mac Pro 5,1 2010 CPU Tray Damage

    Hey guys ,

    Need assistance with a Mac Pro 2010 5,1 single cpu , cpu tray .
    Ive bought the computer used , it’s really been through a hard time.
    Someone has managed to pull components off the bottom side of the cpu tray!!!

    I need assistance in identifying the components and the values of
    1. CG410(missing)
    2. Q2400(TWN. Marking on it) , Q2450(TWN. Marking on it) (this marking does not correspond to any specific IC as far as I can tell , need help to identify!l )
    3. Q2120 (missing) ,
    4. R2444(missing)

    Im attaching a couple of images of the section of the board they are on(I mean should be on , but a not there ).

    Any help would be appreciated.

    Click image for larger version Name: IMG_2865.jpg Views: 108 Size: 813.3 KB ID: 3250961 Click image for larger version Name: IMG_2866.jpg Views: 97 Size: 1.05 MB ID: 3250962 Click image for larger version Name: IMG_2867.jpg Views: 86 Size: 1.02 MB ID: 3250963

    Attached Files
    Tags: None
    • avneeshshrotria
      Member
      • Oct 2019
      • 24
      • India
      #2

      Mac Pro 2009, processor "tray" 820-2482-A

      For anyone else who might be on the same boat as me with these images r2444 is 10k ohm , q2400/q2450 is the (TW sot563) NTZD3155CG , q2120 is (K72 sot-363) is 2N7002DW .


      ​
      Attached Files

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Joel Ohana
          Lenovo IdeaPad 3 15IAU7 that suffered water damage
          by Joel Ohana
          Hi,

          I have a Lenovo IdeaPad 3 15IAU7 that suffered water damage. It doesn't turn on (white power light flashes when on button pressed), and the amber light flashes when plugged in.

          Symptoms:
          • Short detected – sparks appear when touching the charging port connection with board with a metal (even a multimeter probe).
          • Visible damage – after cleaning corrosion, I found 4 possibly burnt memory chips near PC3165, labeled UD5, UD6, UD7, and UD8.

          What are my next steps to diagnose and possibly repair it without replacing the entire board? Any guidance would be greatly...
          03-06-2025, 11:25 AM
        • ChaosLegionnaire
          optical drive tray loading problem
          by ChaosLegionnaire
          i started using a couple of my optical drives again to perform some testing and backup but to my disappointment, they have tray loading problems. both drives wont eject the tray and when i load the tray back, it auto ejects the tray again. it seems that the laser sled assembly in the drives wont drop down fully to the correct position to release the tray and the laser sled assembly wont extend back up to the proper position to lock and load the tray so it auto ejects the tray again.

          i tried lubricating the gears in the tray loading mechanism and the tray sled rails but it didnt...
          02-26-2019, 02:07 PM
        • azozexd
          Need help hp 725 g3 liquid damage
          by azozexd
          Hello freind i have hp elitebook 725 g3 White liquide damage
          after cleaning the board i find à damage resistor white no value i test it not reading in multimeter
          could some one tell me the value of this resistor
          Thank you...
          12-15-2024, 06:01 PM
        • mon2
          A1466 Macbook Air (Liquid damage repair)
          by mon2
          Hi. Recently serviced a damaged A1466 Macbook Air. Thought to post the issues and resolution for each.

          Macbook AIR Model A1466 Diagnostic 09-01-2021

          Issue: Liquid damaged (beer spill) Macbook AIR will not power up.


          Problems & Resolutions

          1) Attached Apple magsafe power adapter. No green / no orange light. This confirms the absence of the PP3V42_G3H voltage rail. The PP3V42_G3H rail is the primary voltage rail necessary to communicate with the magsafe power adapter to report the green or orange light status to the end user....
          09-01-2021, 09:31 AM
        • rtstorm
          HP EliteBook 840 G8 water damage - identify component
          by rtstorm
          Hello, i got an HP EliteBook 840 G8 that has water damage, and i found this component has damage on it U60600. What is that component? I have schematics and boardview and the par no is:
          SINERGY_SYV128RAC_QFN_20P i cannot fount it anywhere. Is this component have some other name?

          Here is schematics + boardview...
          09-18-2024, 05:36 PM
        • Loading...
        • No more items.
        Working...