Mac Pro 2009, processor "tray" 820-2482-A
For anyone else who might be on the same boat as me with these images r2444 is 10k ohm , q2400/q2450 is the (TW sot563) NTZD3155CG , q2120 is (K72 sot-363) is 2N7002DW .
...
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Mac Pro 5,1 2010 CPU Tray Damage
Hey guys ,
Need assistance with a Mac Pro 2010 5,1 single cpu , cpu tray .
Ive bought the computer used , it’s really been through a hard time.
Someone has managed to pull components off the bottom side of the cpu tray!!!
I need assistance in identifying the components and the values of
1. CG410(missing)
2. Q2400(TWN. Marking on it) , Q2450(TWN. Marking on it) (this marking does not correspond to any specific IC as far as I can tell , need help to identify!l )
3. Q2120 (missing) ,
4. R2444(missing)
Im attaching a couple...
-
I just found this glass IC cracked/ broken on the IO BOARD .can't find any info about what IC it is.
Also I've attached the images of the led 2,3,5 ON4 Photos
Leave a comment:
-
Mac Pro 2013 a1481
Hey wonderful that you got the system booted .
I came across this thread in the hopes to find a schematic for the a1481 , I believe they don't exist . Please correct me if I'm wrong. Also if you'd post them i'd be greatful .
i have a Mac Pro 2013 a1481 with led 2 , 3, 5 remaining on and then the system tries to boot to s0 , with led 6, led 7 ie s0 and s4 turning on simultaneously and Turing off .
I don't have a doner board nor schematics … hence trying to figure out where to start to probe . I've checked all connectors and cables which a seated and working fine...
-
Re: Apple 27" Cinema Display (A1316) has trouble turning backlight on
Hey misterkeeks, amazing picture dude... thanks a lot for it ! Exactly what I needed . Now I need to order all of the resistors and figure out the Oscillator pin caps the two white ones in your picture either-side of resistor 93b. If you have any ideas do let me know. But anyway thanks again for the image
Leave a comment:
-
Re: Apple A1407 Thunderbolt Display Power Supply PA-3251-3A
hey do you mind sharing images of this section of the board . The Power factor correction circuit of the thunderbolt display is shorted some of the components . I've changed the NPC1605G IC , but supporting over voltage protection and feedback circuits are still damaged .
Ive highlighted the components I require in the attached images.
thanks...
Leave a comment:
-
Re: iMac 27” a1419 emc 2806 MLB # 820-4652-A boardview and schematics required
No dude ! Unfortunately had to give up !
Leave a comment:
-
Re: Apple 27" Cinema Display (A1316) has trouble turning backlight on
guys I need the values of some of the components around NCP1605 on the power supply board .
I'm attaching an image for reference . I would really appreciate it if someone could help.
Apple thunderbolt display PSU
Board model number : PA-3251-3A
the first one I got the this thread itself.
and the burnt one is what is the current condition of my power supply .
Also if someone is aware of schematics . I could...
Leave a comment:
-
-
Re: iMac 27” a1419 emc 2806 MLB # 820-4652-A boardview and schematics required
After quite a bit of hunting I found this
[url]https://************/threads/apple-imac-a1419-820-4652-schematic-and-boardview.24694/[/url]
But now I don’t have any way to pay to download .
Will someone be willing to download this for me and upload it here.
ThanksRe: iMac 27” a1419 emc 2806 MLB # 82...w.24694/[/url]
Leave a comment:
-
Re: iMac 27” a1419 emc 2806 MLB # 820-4652-A boardview and schematics required
Guys I can help with something else that someone’s stuck at ...I’m open for discussion... I’m not here as a leech. I would really appreciate it someone would reply . Thanks
Leave a comment:
-
Re: iMac 27” a1419 emc 2806 MLB # 820-4652-A boardview and schematics required
Can someone please help...
Leave a comment:
-
Re: iMac 27” a1419 emc 2806 MLB # 820-4652-A boardview and schematics required
so I have taken a picture of a affected area that is behind the GPU . I have also colour coded the pads as best as I can . But due to no schematics I can not figure out what components are missing .I can see at least 6 dudes(caps /resistors) missing.
if someone with the same machine can share a picture of the same area or share values of the components it would be very helpful.
I'd be very grateful to that person.
thanks in advance....
Leave a comment:
-
iMac 27” a1419 emc 2806 MLB # 820-4652-A boardview and schematics required
iMac 27” a1419 emc 2806 MLB # 820-4652-A boardview and schematics required
Anyone who has it can share ... it would be greatly appreciated.
Thanks in advance
Ps someone with a similar machine ever with a 2nd blinking led issue . No power to system issue ??? I would like to discuss.
No activity results to display
Show More
Leave a comment: