help
acer (la9532p) power on no display
Collapse
X
-
Tags: None
-
Re: acer (la9532p) power on no display
What tests have you done so far,its no good just saying help. Have you tried a different charger,memory,cmos battery.. .Have you taken any voltage readings -
Re: acer (la9532p) power on no display
there have all voltages such as 3v,5v,1.3v,1.05v.1.8v.core voltage. i just flash bios.but sameComment
-
-
Comment
-
Comment
-
Re: acer (la9532p) power on no display
Ram slot pin30 voltage?? PLT_RST present?? Did you flashed both bios?? I beleive there are 2 bios on this board-2mb+4mbComment
-
Re: acer (la9532p) power on no display
ram slot 30pin no voltage, yes i flash bios, there are one bios only 4 mb. another is DY component. PLT RST presentLast edited by karimreza2; 09-04-2019, 01:33 AM.Comment
-
Re: acer (la9532p) power on no display
Since you have zero volt on DRAM_RST pin(should be 1.35 if pc3-L) means gfxcore is also missing. I'll still suggest to flash known good bios or probe ram circuit.Comment
-
Comment
-
Comment
Related Topics
Collapse
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?by Tynan DillI was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming...7 Photos -
Dear All,
Please really2 need Help on this Acer A515-52G Motherboard Compal EH5AW LA-G521P Rev: 1A.
At first this laptop can on, keyboard light on but no display. Open the motherboard, found out the PQZ3 Mosfet and PUZ3 ic near it burn. Refer picture below. Then I replaced both. All the power rail 3.3,5,1.2, 1.35, 0.8V have power back after i turn on the laptop except for the VCC_GT rail. Voltage at Power Supply showing 0.000A before turn on, after turn on it became 0.5 0.6A. Seem cannot boot and still no display. Then I replaced the PUG1 and mosfet, but the VCC_GT still no power.... -
by itheHi,
I am using this Acer Aspire V5 571P 6499 laptop for a long time. Laptop does powers on, but no display after properly shutdown while in its last working condition.
Laptop model - Acer Aspire V5 571P 6499
MoBo - Husk MB 11309-4M 48.4TU05.04M
HW config. i5, 4 GB RAM,250GB SSD, Windows 10 OS
status when laptop turned on
no display no logo no BIOS access
status - power led on, charging led (when power adaptor connected), led on power switch glow when power is on.
fan spins and stops for a minute and again start spinning.... -
by aladin2lhello guys i have here ACER NITRO 5 AN515-52 DH55VF LA-F591P POWER ON NO DISPLAY i think it boots beacuse the keyboard lits the fan spin 2 times when power on because i think bios responces without cmos battery also when charger connected then charger plug in it also tones plug and replug my main problem is it wont display even in monitor
heres my voltage and resistance reading for all the coil or inductors i hope someone can help me where to find the missing voltage on +VGA_CORE and +VCC_GT
PL1302 1.3V
PL7202 0.9V
PL8301 1.0V
PL8106 0.9V
PL8305 0.9V
PL8306...1 Photo10-16-2024, 05:17 AM -
by PantherDaveHi all!
I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅
I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
https://www.badcaps.net/forum/troubl...-hardware-devi... - Loading...
- No more items.
Comment