Razer Blade 2013 14" mosfet not recognized

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • kostastnt
    New Member
    • Jan 2017
    • 3
    • Greece
    #1

    Razer Blade 2013 14" mosfet not recognized

    I own that laptop. It suddenly stopped charging. In the motherboard is a chip with 8 legs burned that I can't see the part number completly. It starts with a capital A and ends with the number 155. In the middle it appears that are missing 2 letters/numbers. (A**155)

    Anyone can help me find that chip? Thank you very much!
    Tags: None
    • stj
      Great Sage 齊天大聖
      • Dec 2009
      • 30952
      • Albion
      #2
      Re: Razer Blade 2013 14" mosfet not recognized

      look at the other mosfets,
      laptops are usually designed to use the same parts as much as possible for cost reasons.

        Comment

        • kostastnt
          New Member
          • Jan 2017
          • 3
          • Greece
          #3
          Re: Razer Blade 2013 14" mosfet not recognized

          Thank you very much! I will look the other parts!

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Silent18
              razer blade 14 2013 rz09 0102x
              by Silent18
              Guys do you have razer blade 14 2013 rz09 0102x bios....
              thanks in advance!!!
              07-01-2024, 11:48 PM
            • theplop
              Razer blade 2022, 14" PI480 wont boot to OS, freezes
              by theplop
              Razer blade 2022, 14" PI480, Ryzen 6900HX, 16gb ram

              I picked up a Razer blade 14" (2022) from a friend who said it "overheated" and he replaced one of the fans. He gave up on it as windows wouldn't work/re-install. He gave it to me, and i've been working on getting linux on it. Installing Mint i was able to get about 1/4 through the installer before it froze. Now i can't even get the installer to boot. I am met with a kernel panic.... sometimes. Sometimes it just hangs on the boot sequence.

              I've run memtest quite a few times, and more often then not...
              4 Photos
              03-20-2025, 06:42 PM
            • shellybelly
              Razer Blade 2016 6700k 1060 RZ09-01952 suspected backlight power rail issue.
              by shellybelly
              Back Story
              I just recently purchased a RZ09-01652 Razer Blade 14 Touch v4(2016) as a project. I suspect the original motherboard had overheated and caused board damage to the vrm's for the CPU and GPU as now that motherboard works however will lockup on you often due to hardware clock issues.
              So after some research and looking at options for replacement motherboards I got a replacement RZ09-01952 razer blade 14 motherboard which has the 1060 vs the 970m that was in my original motherboard. I have contacted the seller about the motherboard being bad however I doubt they will be...
              08-27-2023, 10:40 PM
            • Jane
              How do you test MOSFET in laptops ?
              by Jane
              I tried to use this method:

              Testing an N-channel MOSFET:

              Step 1: Discharge the Gate (turn off the MOSFET)
              Place the black probe (COM) on the Source (S) and the red probe on the Drain (D). The multimeter should show no continuity (high resistance or "OL" – open line).
              Then, touch the black probe to the Source (S) and the red probe to the Gate (G). This discharges any stored charge in the Gate, turning the MOSFET off.

              Step 2: Charge the Gate (turn on the MOSFET)
              Now, place the red probe on the Gate (G) and the black probe on the              ...
              09-27-2024, 03:31 AM
            • Rangry
              Razer Blade 15 2022, No internal display, Error Code 43
              by Rangry
              Hi! I have a Razer Blade 15 2022, with a RTX 3060.

              One day, while using Linux, the internal display suddenly stopped working.

              On Windows, it says that the internal GPU has stopped working (with error code 43).

              I have tried removing the coin cell and the battery, and replacing the RAM, with no success on fixing anything.

              I'm looking for directions to fix this problem, and, first of all, I would like to be able to access the BIOS and change some settings (which is currently impossible as it is always shown on the internal display). There is a setting...
              05-29-2025, 07:01 AM
            • Loading...
            • No more items.
            Working...