Razer Blade 2013 14" mosfet not recognized

kostastnt

New Member

Join Date: Jan 2017

Posts: 3

Country: Greece
#1

Razer Blade 2013 14" mosfet not recognized

11-09-2018, 03:02 PM

I own that laptop. It suddenly stopped charging. In the motherboard is a chip with 8 legs burned that I can't see the part number completly. It starts with a capital A and ends with the number 155. In the middle it appears that are missing 2 letters/numbers. (A**155)

Anyone can help me find that chip? Thank you very much!
Tags: None
stj

Great Sage 齊天大聖

Join Date: Dec 2009

Posts: 31009

Country: Albion
#2

11-09-2018, 03:57 PM

Re: Razer Blade 2013 14" mosfet not recognized

look at the other mosfets,
laptops are usually designed to use the same parts as much as possible for cost reasons.
Comment
kostastnt

New Member

Join Date: Jan 2017

Posts: 3

Country: Greece
#3

11-11-2018, 01:07 PM

Re: Razer Blade 2013 14" mosfet not recognized

Thank you very much! I will look the other parts!
Comment

Previous template Next

razer blade 14 2013 rz09 0102x

by Silent18

Guys do you have razer blade 14 2013 rz09 0102x bios....
thanks in advance!!!
- Channel: BIOS Requests ONLY!
07-01-2024, 11:48 PM
Razer blade 2022, 14" PI480 wont boot to OS, freezes

by theplop

Razer blade 2022, 14" PI480, Ryzen 6900HX, 16gb ram

I picked up a Razer blade 14" (2022) from a friend who said it "overheated" and he replaced one of the fans. He gave up on it as windows wouldn't work/re-install. He gave it to me, and i've been working on getting linux on it. Installing Mint i was able to get about 1/4 through the installer before it froze. Now i can't even get the installer to boot. I am met with a kernel panic.... sometimes. Sometimes it just hangs on the boot sequence.

I've run memtest quite a few times, and more often then not...

4 Photos
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
03-20-2025, 06:42 PM
Razer Blade 2016 6700k 1060 RZ09-01952 suspected backlight power rail issue.

by shellybelly

Back Story
I just recently purchased a RZ09-01652 Razer Blade 14 Touch v4(2016) as a project. I suspect the original motherboard had overheated and caused board damage to the vrm's for the CPU and GPU as now that motherboard works however will lockup on you often due to hardware clock issues.
So after some research and looking at options for replacement motherboards I got a replacement RZ09-01952 razer blade 14 motherboard which has the 1060 vs the 970m that was in my original motherboard. I have contacted the seller about the motherboard being bad however I doubt they will be...
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
08-27-2023, 10:40 PM
How do you test MOSFET in laptops ?

by Jane

I tried to use this method:

Testing an N-channel MOSFET:

Step 1: Discharge the Gate (turn off the MOSFET)
Place the black probe (COM) on the Source (S) and the red probe on the Drain (D). The multimeter should show no continuity (high resistance or "OL" – open line).
Then, touch the black probe to the Source (S) and the red probe to the Gate (G). This discharges any stored charge in the Gate, turning the MOSFET off.

Step 2: Charge the Gate (turn on the MOSFET)
Now, place the red probe on the Gate (G) and the black probe on the...
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
09-27-2024, 03:31 AM
Looking for schematic or bv for Razer Blade 15 RZ09-0328 MOBO: DA550-MB

by bumper1

Razer Blade 15 RZ09-0328
MOBO: DA550-MB MP V4.0 20200227
- Channel: Schematic Requests ONLY!
07-10-2025, 03:40 AM
Loading...
No more items.

Razer Blade 2013 14" mosfet not recognized

Razer Blade 2013 14" mosfet not recognized

Comment

Comment

Related Topics