Announcement

Collapse
No announcement yet.

A1502 EMC2835 OSX Installation stuck

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    A1502 EMC2835 OSX Installation stuck

    Model: A1502 EMC 2835
    Serial: C02Q8Y16FVH3

    Problem: Cannot install MacOSX High Sierra, Sierra etc., stuck in apple logo with progress bar.
    Windows 10 setup continues without any issue.

    Reset NVRAM - no effect
    Cleaned MEI - no effect
    Reflash another clean dump - no effect

    Attached dump, so somebody could look into it.
    Attached Files

    #2
    Re: A1502 EMC2835 OSX Installation stuck

    is the hdd ok? take it out and test in in pc with hirens boot (hdat2, mhdd, hddregenerato or whatever)
    maybe it has bad sectors

    few times i had problem with mac installation, like error in formatting or copying setup files and at all times it was fucking hdd cable (little flex shit connection hdd and logic board)

    older models had that problem
    Last edited by ala_borbe; 02-03-2018, 04:51 PM.
    Im Back... sort of...

    Comment


      #3
      Re: A1502 EMC2835 OSX Installation stuck

      @ala_borbe

      I checked anouther hdd but same. btw it's 128gb ssd inside.

      Comment

      Working...
      X