HI
Please can someone tell me what are the main raisons of flashing this chips
Please can someone tell me what are the main raisons of flashing this chips
-
-
Re: Kbc ene ite
Only certain ITE models required reflashing because there is a memory inside that contain the EC firmware, in other architecture this is stored in a separate memory chip or in a main bios chip.
Most of asus models reflash it automaticallyLast edited by jasko_jacker; 08-07-2017, 07:11 AM. -
Re: Kbc ene ite
And what will lead me to flash these chips?i mean in which circumstances will be the machine in before i can decide to flash these chipsComment
-
Re: Kbc ene ite
Only in Asus models?Most of asus models reflash it automatically
What about Dell, Lenovo,....
And if the chip is blank or corrupted, how can it initiate the sequence for auto-reflash?
Thanks for your answers.
I'm afraid there's no an easy answer.And what will lead me to flash these chips?i mean in which circumstances will be the machine in before i can decide to flash these chipsLast edited by Francisco.s; 08-07-2017, 01:05 PM.Comment
-
Re: Kbc ene ite
Bachir2004,thanks,nice to hear youComment
-
Re: Kbc ene ite
Main reason would be when you are replacing KBC with new one (because it's burned), and you will not always find pre-programmed chips for every model.
Until a few years ago the EC BIOS was either integrated in the main BIOS (single flash chip on the board) or had its own little flash next to it. Then they came up with the idea of integrating some flash memory inside the EC to do away with the external chip. That's why they need to be programmed.Last edited by Th3_uN1Qu3; 08-08-2017, 02:39 AM.A working TV? How boring!Originally posted by PeteS in CAComment
-
Re: Kbc ene ite
The Unique,thanks for your replyComment
-
Re: Kbc ene ite
So the Big question is when i change the mec1633l chip from a lenovo T440 with a blank one will the Bios password remove and will it start??Comment
-
As the Elitebooks (820, 840 all gens) only show flashing Power LED and flashing CapsLock (continuously) + a very soft "ticking" noise near the DC Jack,
I wonder if re-flashing the BIOS might be of any use here.
As far as I understood, steady flashing either means insufficient power or a CPU/GPU/Motherboard issue. I use the original 65watt power supply.
There are so many threads out there, but most of the solutions involve flashing codes, which I dont have or claim that you MUST use the original power supply, do a hard reset, reseat the RAM, clean the RAM,... -
I suppose the real question is whether the existing pinouts from ether a 17IPS71 psu are cross compatible with a 17IPS12 psu? If they are then the exchange of the main boards should have no issues providing the screen is compatible with both main boards. Obviously you can change the screen configurations easily enough (providing you have the correct files) for the main board. Why may you ask would I do this? Well a lot of the smart features are no longer working on a Hitachi 48HBT62U main board I wish to give it a new lease of life!
Obviously the same LVDS connector for the screen connection... -
Hi and thanks in advance for any input you might provide!
I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO
Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this... -
Hi everyone,
Iām looking for help with a persistent issue on an LG TV model 55NANO77SRA, which uses the main board EBU66792103 (also used in LG UQ80 and NANO75/NANO80 series).
š§© Problem Summary:- The TV keeps scrolling through the menu or selecting items by itself.
- I removed the physical button board (the entire panel with power and volume buttons) and also disconnected the flat cable (CN202) from the main board.
- The remote control is not in use (batteries removed), and the TV still shows the same behavior.
- I
Today, 08:34 AM -
Hello,
I have spent the last hour on this and I guess this is just over my head, so here I am.
I have an ASUS TUF GAMING Z790-PLUS WIFI motherboard here that needs to have the BIOS updated in order to accept the latest CPUs.
The BIOS chips seem to come as a set of two: GD25B64ESIG and GD25B128ESIG. My guess is one of them is a fail-safe for the main BIOS? I really don't know. Or one of them is ME and other is BIOS? I don't know.
Anyway, I took dumps of both chips and then downloaded the latest update for this motherboard from ASUS's website...
Comment