lenovo B590 power on problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sourcebf
    Badcaps Veteran
    • Jul 2016
    • 431
    • N/A

    #1

    lenovo B590 power on problem

    Hi everybody,

    I have a lenovo B590 board :
    LB59A MB
    12209-1
    48.4XB01.001

    It doesn't start by pressing on power sw although 3.3v is present on power sw.
    I shunted it with GND without result.

    The motherboard starts only if I remove the CMOS battrie and I plug the power charger.

    help me please.....
    Attached Files
  • sourcebf
    Badcaps Veteran
    • Jul 2016
    • 431
    • N/A

    #2
    Re: lenovo B590 power on problem

    update....see picture attached
    Attached Files

    Comment

    • sourcebf
      Badcaps Veteran
      • Jul 2016
      • 431
      • N/A

      #3
      Re: lenovo B590 power on problem

      Comment

      • byulo
        ECT
        • Jun 2012
        • 87
        • Philippines

        #4
        Re: lenovo B590 power on problem

        If the charging indicator won't light also try to reflash your BIOS. It's a common issue on Lenovo laptop

        Comment

        • byulo
          ECT
          • Jun 2012
          • 87
          • Philippines

          #5
          Re: lenovo B590 power on problem

          Try this bios dump.
          Attached Files

          Comment

          • sourcebf
            Badcaps Veteran
            • Jul 2016
            • 431
            • N/A

            #6
            Re: lenovo B590 power on problem

            Originally posted by byulo
            Try this bios dump.
            thanks a lot, i'll try and reply....

            Comment

            • sourcebf
              Badcaps Veteran
              • Jul 2016
              • 431
              • N/A

              #7
              Re: lenovo B590 power on problem

              the same problem with your bump....

              Comment

              • fester
                Senior Member
                • May 2017
                • 158
                • Slovakia

                #8
                Re: lenovo B590 power on problem

                meassure double diode Q6001 if is ok.

                Comment

                Related Topics

                Collapse

                • Dr.d
                  Help please..Lenovo ideapad 5 14itl05 power and charging problem
                  by Dr.d
                  I have a lenovo ideapad 5 14itl05, board LA-K321P, That will only power up on Battery only, or with battery disconnected and power adapter only. If battery is connected and usb-c power plug connected. It only works on battery and will not charge. I can however force it to charge by connecting the battery from a disconnected state while the power USB c plug is powering the laptop.

                  Additionally....to add to this strange situation. The usb-c power plug ONLY works to power the laptop on one side when inserted into the boards power usb c plug. If you rotate it 180 degrees, the board gets...
                  04-05-2024, 11:48 AM
                • theone111
                  Problem with LG Plasma 60PM6700 - Random power downs
                  by theone111
                  I have an LG Plasma TV 60PM6700 for the past ~12 years.

                  In the last ~3-4 months I have been having some issues.
                  1. Problem: It started with random picture disappearing (sound still worked).
                    Frequency: Happened about once a week.
                    Solution: Had to turn off TV wait a few seconds before turning it on again.
                  2. Problem: Then it got worse and the TV started to shut down and when turning on the no picture just sound.
                    Frequency: Happened about once a week.
                    Solution: Had to turn off TV wait about 10-20 seconds and turn it on again to solve.
                  3. Problem: TV shuts down
                  ...
                  07-22-2024, 10:36 AM
                • Duranitron
                  Asus x512dk rev 2.1 power on problem
                  by Duranitron
                  When I reflash again the bios of hoaca388 the unit powers on and the unit lives!!! Hooray!! All voltage in the coil 3.3v, 5v and 6.7v indicate charging are all present. including the cpu voltage , EEPROM and GPU voltage the unit is now alive, normal screen booting to windows and log in screen until I power it off. Then the unit never goes on even when pressing the power button in the keyboard.. Voltage reading 19v main , 3.3v VCC in IT8225E-128 and EEPROM VCC 0 volt and the charging voltage 0 volt.

                  Try to trace the power switch button goin to the power switch IC PU8803 (APL3533AQBI-TRG)...
                  11-26-2024, 10:22 PM
                • Mita99
                  Lenovo Thinkpad P72 EP720 NM-B723 MB - Power disabled within 2 seconds after plugging the charger
                  by Mita99
                  Hi,

                  Try to repair a Thinkpad P72 EP720 NM-B723 MB with I7-8850H processor and N18E-Q1-KB-A1 (P3200) GPU with 6GB memory. Unfortunately there is noinfo what happened to the laptop. I got it disassembled with parts missing, like keyboard, battery.

                  Unfortunately I have no schematic available for me (requested in the sub porum) but got the boardview file.

                  Symptom: after connecting to the charger the power led light up for one-two second and switch off. After a couple secons the power led light up for half a second and switch off. No battery, no IO board, no...
                  04-27-2025, 07:20 PM
                • SoulFreeze
                  Lenovo Slim Pro 7 14ARP8 83AX No Power
                  by SoulFreeze
                  Hello All, I have a Lenovo Slim Pro 7 14ARP8 83AX, Board No NB6369A_MB_V5

                  Behavior - Pressing power button results in three second led blinks on the button,
                  Connecting charger lights up orange as normally would while charging.
                  Connecting charger without battery blinks orange.
                  No fanspin.

                  Tried flashing bios, no change.

                  I inspected the board and found a burnt component on the USB / Power button daughter board. I assume the comonent was an esd protection diode as it was on the USB A port power rails. removed the component but still exhibits...
                  05-01-2025, 09:04 PM
                • Loading...
                • No more items.
                Working...