sourcebf
Badcaps Veteran
Last Activity: 12-08-2025, 03:00 PM
Joined: 07-27-2016
Location: Home
-
thanks a lot all is good now... -
Hi for all,
please my original files is corrupted and i tried many dump posted here without any positive result, so please give me a hand
HP Elitedesk 800 G3
SN:8CG7273FBN...Leave a comment:
-
thanks for your reply, but with this dump motherboard is completely dead and consume just 0.6 amps...Leave a comment:
-
hi every body,
i upload my original file, in my case i have no display, i tried dump posted by @hoaca388 laptop poste but don't recognize SSD, so may someone clean my original
motherboard: nm-D352 REV :2.0
SERIAL:PF-3P8T93
TYPE :20W1
nb: I tried to clean it by my self but CSME System Tools v15 give me an error when i open the file...Leave a comment:
-
tthanks for helping but with thhis dump laptop is completly dead
my bad, your dump is working very well, thanks for your help bro...Last edited by sourcebf; 04-20-2025, 03:30 AM.Leave a comment:
-
Hi for all,
Please unlock this bios for HP ProBook 440 G9 DA0X8SMB8H1 REV H
CN : 5CD223CHMM
thanks in advance...Leave a comment:
-
Hi bro thanks for your help, with you dump board is completly dead...Leave a comment:
-
hi for all,
can you clean this dump for me
it is an A1466 EMC3178
BOARD : 820-00165-A
SERIAL: C1MV3RNPJ1WK...Leave a comment:
-
Try ......Leave a comment:
-
and check PU2 Vout if you have 3.3 v at the output (it is applicable for LA-E082P motherboard number)
...Leave a comment:
-
try to remove this component and try the board without it, please add your board ID number...Last edited by sourcebf; 10-15-2024, 02:12 PM.Leave a comment:
-
I looked for it but couldn’t find anything I could start working on, so any help is appreciate...Leave a comment:
-
hi for all,
I have an ASUS X513AE R4.3 that powers on and consumes 0.33 amps. All voltages are present except for +VCCIN (see attached picture). I checked the BIOS dump and found that the KBC is IT8985, but the board has IT5125, so this dump is not the original. I have attached this dump. I hope someone can help me with a working dump for this board or provide any advice.
...Leave a comment:
-
Thank you for your support; I really appreciate it. However, the same problem persists, and it seems to be an issue with KBC....Leave a comment:
-
YOUR SERVICE TAG IS : D2N8ST2
TRY.......Leave a comment:
-
hello need a help
I attached all informations of the laptop
my laptop start but not detect keyboard and mouse mybe it is bios issue
MODEL :AUSU x415j
R409JA-EB1788W
Serial: N1N0CX123009024
board is: X415JA R3.1
need new dump if possible, thanks in advance...Leave a comment:
-
thanks a lot for the trick, it works for me too...Leave a comment:
-
Try...Leave a comment:
-
Dear all,
I made some correction on my reconstructed dump according to SMDFlea instructions that i find in an other post, but laptop still not posting,,, i did my best...Leave a comment:
-
HI FOR ALL
I tried to build new dump using exe file from dell website and also clean ME without success (LAPTOP WORKS WITHOUT DATA ON SCREEN), i attached new bios built with FIT to have your advice if any
my ST is : DT5WFC2
thanks in advance...Leave a comment:
No activity results to display
Leave a comment: