Dell 3521(la9104p).its giving 7 beeps.thats means cpu core supply is not generation.i have changes isl95833 than also same problem.plz help
Dell 3521 LA9104p.cpu failure
Collapse
X
-
Tags: None
-
-
Re: Dell 3521 LA9104p.cpu failure
THanks but problem solved.it was not pch or cpu.1.2k resistor open.it took lots of time to find outComment
-
Re: Dell 3521 LA9104p.cpu failure
Can you upload and show the image of tje resistor please?thanksComment
-
Re: Dell 3521 LA9104p.cpu failure
dell 3521 la9104p laptop not charging, charging ic good. 2 second detect charging after descended charging, lap working power adapter & battery. how to fix charging problem
plz help meComment
Related Topics
Collapse
-
by BowlineMy question pertains to understanding the control circuity inside a Dell PT434 type battery used in Dell E6400, E6410 and other Dell notebooks?
Does anyone have a circuit diagram for the inside of a Dell PT434 battery and/or a description of how the control lines work to control this battery?
My reason for asking is I have a battery which I cannot get to charge beyond 1% in a Dell E6410 or E6400.
The LED bar graph charge indicator on the battery shows one LED lighted when the info button is pressed.
I have tried multiple different Dell power adapters. My Dell... -
by ThemiI have this laptop a dell XPS 13 9310
Power on is ok, stuck at dell logo flashing 2 amber and 4 white (link dell service manual) 2,4 Memory or RAM (Random-Access Memory) failure
I believe this is the spec from using micron tool to decode marking
Images of the ram
I am thinking to replace but wondering if there is a possibility to test while in circuit to find the faulty module? I am doubting there is any reasonable test possible while in circuit as most ram ICs I have tested previously, I have done while off board / removed.
Another...11-24-2024, 09:06 AM -
Dell Inspiron 3521 15" Laptop Schematic & Board View...
-
Channel: Schematics and Boardviews
-
-
by hobostoveI have a Dell gaming laptop here with a blink code of 3 red, 5 blue (power rail failure). 3V and 5V are present, but 1.8V is missing. I looked at PU1801 according to the schematic, and it's not receiving an enable signal. Any ideas where to check next? I think that signal comes from the PCH.
No obvious shorts under thermal (or probed), damaged components, liquid, etc.
Board: LA-K472P
Link to post with schematic -
by F R 2568Hello all,
this is my first post, so if I make mistakes please do not hesitate to point them out, thank you in advance.
I got a Dell Latitude 5420 (Service Tag: 7RFM6D3, Motherboard: GDF40 LA-491P Rev.: 2.0 (A01)) which does not start and I want to repair it. These are the symptoms:
If the laptop is only connected to the AC adapter (battery removed):
When I press the power button, the keyboard backlight and the display backlight are turning on. Caps key light is lightning, but key does not respond to pressing it.
The power/battery... - Loading...
- No more items.
Comment