La-5892p B+ 10 V need help

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • gcomputers
    Badcaps Veteran
    • Apr 2013
    • 509
    • Albania

    #1

    La-5892p B+ 10 V need help

    This laptop coming with non charge issue.
    Model la'5892p

    Please see page 38
    PQ51 - pin 1-8 =19v
    PQ52-pin 1-4 =19v
    pin 5-8= 10v here is the problem from here all b+=10v
    Another thing PQ62 when i plug adapter pin 123-5678 are shorted between them and have 10v.
    replaced all this mosfet replaced with used Isl 6265 but the same problem b+ 10v.
    with battery inserted led of charge blink .
    i m totally confused any help please
  • gcomputers
    Badcaps Veteran
    • Apr 2013
    • 509
    • Albania

    #2
    Re: La-5892p B+ 10 V need help

    Any help

    Comment

    • cyberhack
      Badcaps Veteran
      • Feb 2013
      • 466
      • Uk

      #3
      Re: La-5892p B+ 10 V need help

      PQ51 pin 4 and PQ52 pin 4 are connected has to go low for the volts out
      and disconnect PL45 to test.I have had PC248 short in the past.

      Comment

      • gcomputers
        Badcaps Veteran
        • Apr 2013
        • 509
        • Albania

        #4
        Re: La-5892p B+ 10 V need help

        Originally posted by cyberhack
        PQ51 pin 4 and PQ52 pin 4 are connected has to go low for the volts out
        and disconnect PL45 to test.I have had PC248 short in the past.
        Thanks for your reply , i replaced pc248 and pr 354 but no change 10v remain again. i have similar motherboard functionaly and on pin 4 of PQ51 , PQ52 have 9 v. i m totally confused , any suggestion please

        Comment

        • gcomputers
          Badcaps Veteran
          • Apr 2013
          • 509
          • Albania

          #5
          Re: La-5892p B+ 10 V need help

          5 minuts for me please

          Comment

          • highpulse
            i hate HP
            • May 2013
            • 1489
            • portugal

            #6
            Re: La-5892p B+ 10 V need help

            g computer , there is nothing to be confused here , your gate is with 9 volts (if P channel , that will allow 19 volts to pass) if its N then it will pass only whatsoever you will have on the source

            Comment

            • highpulse
              i hate HP
              • May 2013
              • 1489
              • portugal

              #7
              Re: La-5892p B+ 10 V need help

              so , attention , as you says , if you insert power you will have continuity between 123 5678 , well simple because there is gate open that make continuity . but now haing b+ = 10 volts is simple . your machine is detecting that its working only on battery mode . so it will give you only a B+ of the residual you got on the battery or battery circuit .

              your main problem here is that switching is not working here .and for my experience on does motherboard does acer 5742 shit... eheheh they are real pain in the ass , and problems is near battery socket , you will find a few transistors there , and they are culprit

              so chek following , by this order . remove outside board and test one by one if they work with active and low gate and if they DO the work they shouldd DO

              pq61 - pq57 - pq53 - pq51 and pq52 ..
              chek ACON PACIN ACOFF

              Comment

              Related Topics

              Collapse

              • eukal
                Acer 5742G Power only on battery.
                by eukal
                Hello i have a weird problem on an Acer 5742G. The laptop start and work perfectly on battery. But on ac adapter only i can't power it on. I have make a lot of test and check but i can found the problem. But at the beginning i have found corrosion on and around the PU18. I have clean the area but same problem. I have replace some cap that have not the good resistance and also replace the pu 18 and PD1 but same problem. If i check the PL27 and PL28 on battery i have fixed voltage 3 and 5v (always volatge) but on ac adapter the voltage run from 2 to 3v and 3 to 5v constantly. Because i have an other...
                09-03-2022, 09:03 PM
              • reset1986
                Acer new70 la5892p black screen intel sl6zs boiling
                by reset1986
                hello, I have this motherboard that turns on, but from the black screen, I notice the bga sl6zs that becomes very hot,
                I ran the reball on the bga but the situation does not change, do you have any suggestions?...
                09-18-2018, 02:10 AM
              • u666sa
                Lenovo IdeaPad S10-3 (Quanta FL5 DAFL5CMB6C) - water on ISL6237, no 3VCPU, no 5VCPU
                by u666sa
                Help fellow newb out! Fix his old salave netbook and learn fixing stuff in process.
                ISL6237 had coffee damage, cleaned it with benzine. VIN is present, there is no 3VCPU and no 5VCPU. What do I replace? ISL6237 or PQ51, PQ52, PQ50, PQ55?
                (isl6237 is two months away from china, no local availability)
                What will be the most likely culprit here?

                full size - https://ibb.co/6s0Q7rW


                Attached boardview + schematics...
                12-09-2019, 11:27 AM
              • John McGivern
                ACER 5742 Dead M/Board
                by John McGivern
                Hi, i am trying to repair this motherboard.
                Ny daughter spilled red wine on it.
                Adaper 19v
                First mosfet PQ51 drain side 19v, nothing on gate or source.

                Questions, 1. Do I have to install RAM for testing?
                2. Current sense resistor missing R020 -2512-1%.
                3. How difficult is it to solder this component?
                4. Can I test without this or is value critical?

                I have a 30v 1amp variable power supply for testing.

                Many thanks in advance.
                See photos and PDF....
                10-14-2019, 11:43 AM
              • modtool
                Sony Vaio VPCEH 2S9E PCG-71911 HK1 MBX-247 REV E UMA, shuts down unexpectedly
                by modtool
                Hello to everyone, I need help to diagnose an annoying problem with this laptop.
                As the owner said, it has never been dropped and no liquid was ever spilled inside, and I think it's true because there are no aethetic damages to the chassis nor internal oxidations in any part of the board, she told me that it started shutting down randomly.
                I can switch it on by power button, everything works fine, Win 7 loads and works flawlessly, you can browse folders, files, listen to music and browser the internet, temperatures are in normal values (around 50°C for not loaded CPU, around 70°C...
                06-25-2017, 09:57 PM
              • Loading...
              • No more items.
              Working...