New Members
Please consider donating to this site if it has helped you. We rely on these donations.
Please also introduce yourself here Introduce yourself here.
And finally, Read the Forum rules here.
????????
please explain yourslef bether , CRACK , what crack ? , board models , what are the causes you are cheking on the device ?? be more specific , this kind of post are null here !
Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
lol... u r right i have to explain what i min to say is that i have thisthoshiba l 300 laptop mother when i bend the mother bord or if i press it in the center area it works fine but if i bend it in the other back side it wont so that mins their is a crack(loss connection) between the component and motherbord printout
thanks
I guess it's Intel motherboard with Core 2 Duo family processor.
First find correct schematic and measure all main voltages. If they are fine as I assume, I would suggest to check both Intel bridges.
If you have equipment, try to reball SB first, it's much easier, if doesnt help, do very carefully NB.
Please help
i have this motherbord. i dont know model i need bordview or shematic please.
my problem is when i put 12v dc , 3v5v ic became hot i change it but its the same problem. Some idea to fix it ?
helo evreyone
i have motherbord GA-EP41T-UD3L
the proccesor fan spin slowly and the (RST) LED in post card is flashing.
i check the MOSFET and VCORE and its ok..
i replaced many proccesors and nothing haapend.
i tried to charge the bios many times and its the same result.
the ram1.8v is ok.
the south and north bridges voltage is normal.
can anyone help me please?.
Issue:
Disc is showing as not supported when a disc is put in.
Here's what I've done, you can skip this if you just wanna know the question:
- replaced with a disc drive from a donor ps5 (honestly questionable if this is known to work)
- reflowed the disc drive connector
-reflowed the chip in question (shown on image)
- I will say this console was very dusty so it's conceivable that it got so hot that it made the chip joints cold and potentially other things on the board
i have a laptop [MB: 45326560 SPS: 921048-601] that refuses to boot, i think i found the problem but i'm unsure how to fix it tho. http://imgur.com/a/Zn0WTM1
i apriciate all the help i can get, thanks ��...
Comment