problem in motherbord gigabyte GA-EP41T-UD3L

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • fysal
    FYSALALHEFAWE01
    • Nov 2022
    • 1
    • Syria
    #1

    problem in motherbord gigabyte GA-EP41T-UD3L

    helo evreyone
    i have motherbord GA-EP41T-UD3L
    the proccesor fan spin slowly and the (RST) LED in post card is flashing.
    i check the MOSFET and VCORE and its ok..
    i replaced many proccesors and nothing haapend.
    i tried to charge the bios many times and its the same result.
    the ram1.8v is ok.
    the south and north bridges voltage is normal.
    can anyone help me please?.
    Tags: motherboard repair, troubleshooting
    Previous template Next

    Related Topics

    Collapse
    • pkslowk
      Debug Card Error Code and Solution
      by pkslowk
      Sr. Motherboard Debug Error Code Solution
      1 Intel 845 E9 Bios Related Problem
      2 Intel 845 D4 CPU Socket Related problem
      3 Intel 845 37 Bios Related Problem
      4 Intel 845 7C Bios Related Problem
      5 Intel 945GCPE 34 Bios Related Problem
      6 Gigabyte 845 2 Ram Related Problem
      7 IBM Server A6 A7 Ram Mismatch Problem
      8 Asus 845 29 CPU Related Problem
      9 Lenovo I946 97 C-Mos Jumper related
      10 Gigabyte 845 A0 CPU Related Problem
      11 Asrock G31M-VS D7 Bios Related Problem
      12 Compaq 845 BD-70G B0 CPU Socket Related problem...
      01-28-2021, 12:51 PM
    • iT0mT0m
      Problem with motherboard Gigabyte X570S Aero G - no detect RAM
      by iT0mT0m
      Hi,

      I have problem with detection RAM on this motherboard. When I install CPU(Ryzen 5 2600, 5 4500 or 5 5600G) DRAM Led is lighting all the time. I tried reflash various verion of bios using Q-Flash method and that not resolve my problem. I tried reflash bios by SVOD 4 but that not resolve problem too. All voltages is correct and I don't see any low resistance on coils and other elements on motherboard. I tried replace memory to other and nothing. I don't know where is a problem(maybe connections between cpu and rams socket?). Actually I have boardview for this motherboard and I have...
      12-23-2023, 12:17 PM
    • Xristakis795
      GA-P35-S3 gigabyte motherboard problem after upgrade
      by Xristakis795
      hi to all
      I have the above motherboard on which I had windows xp I upgraded it to windows 10 everything went well just when it rebooted and got updates i saw a message for a very short time that windows is trying to fix a problem they found and then the problem was overcome and all is well
      the computer works normally without any problems on the internet and in everything
      but I found out unfortunately when I had completely cut off the power supply from the network and I went the next morning and plugged it in to turn it on when it went to boot a black screen and the cpu was working...
      12-28-2021, 06:24 AM
    • theone111
      Problem with LG Plasma 60PM6700 - Random power downs
      by theone111
      I have an LG Plasma TV 60PM6700 for the past ~12 years.

      In the last ~3-4 months I have been having some issues.
      1. Problem: It started with random picture disappearing (sound still worked).
        Frequency: Happened about once a week.
        Solution: Had to turn off TV wait a few seconds before turning it on again.
      2. Problem: Then it got worse and the TV started to shut down and when turning on the no picture just sound.
        Frequency: Happened about once a week.
        Solution: Had to turn off TV wait about 10-20 seconds and turn it on again to solve.
      3. Problem: TV shuts down
      ...
      1 Photo
      07-22-2024, 10:36 AM
    • Rofix
      Problem reset BIOS password GIGABYTE GA-F2A78M-DS2
      by Rofix
      Hello everyone and I wanted to ask you for advice as I am trying to reset the BIOS password of this GIGABYTE motherboard
      GA-F2A78M-DS2 but I can't, I tried both removing the battery and moving the CLR_CMOS jumper bridge but nothing to do. Thank you all for any advice​...
      07-19-2024, 11:00 PM
    • Loading...
    • No more items.
    Working...