Can someone please help me identify this ic, please check image. It came from an unknown laptop brand. Owner only sent me the board and charger. After pressing power button led lights up and goes off after 2 seconds. This ic is heating up. hope someone knows. Thanks
Does anybody recognize this ic?
Collapse
X
Related Topics
Collapse
-
by StachujonesHello, i bought a faulty Dell xps 13 9370 after installing windows in device manager i Can see 2 unknown devices, one is thingerprint reader because it dissapears after i unplug it and second one is i believe bluetooth because it also doesnt work and in bios there is no bt also.
Device manager says "unknown device, failed to request device descriptor"
Can somebody point me in right direction what to check?
I updated bios to the newest version and thunderbolt controller firmware still no luck1 Photo -
by apostsamkingHello everyone hope all is well. Pls I bought this second hand dell latitue e5450, I realize that the battery cannot be charged because it says ac adopter unknown at bios. I tried several chargers but still I get the same messageAC Adaptor unknown. So I open the laptop up checked the motherboard and i realised that the diod PD5 is fried so I changed, but I still get the same message, changed even the charging ic still the same message AC Adaptor unknown. Can any one help me?
-
by TheUserHello to everyone ,
This is my first post here, and i would like to share with you a small story in case you can help me.
Docker Type-C Gen 2 - Model 40AS. Was given to me by a friend for free ,but with the problem that you cannot use the video output ports.
All ports work , USB , Ethernet, Type C ... but HDMI + Display Port don't work
I searched on reddit and google for problem similar to that, and a LOT of people had fixed this problem by updating the firmware. So i tried , i searched and found 1.1.13 utility and 1.1.20 utility that can help...02-10-2024, 02:07 PM -
by Grucha98Hi i have problem with laptop. In bios I have idle and ac adapter unknown but on PS_ID_R i have 2v33. What voltage should be on PS_ID_R?
Dell 5300 NorthBay 18827-1
Thx for help... -
by GregormcHi, the pc does not recognize my SSD, I was testing Volt and the SMC_OOB1_D2R_L, and gives 0.03v approx, and it should provide 3.3v I think, what can be the problem? maybe is the resistance (R86101) I cant test it with my multimeter too small, but I don't think that would do the V go to 0.3v, and SMC_OOB1_D2R_L has continuity with the test point. I think all other pins are okay.
Link to schematic/boardview --> https://www.badcaps.net/forum/troubl...-only/71623-82... - Loading...
- No more items.
Comment