Dell n5010 can be converted from graphic version to non graphic

[ravi441]

Re: Dell n5010 can be converted from graphic version to non graphic

i fallow n5010 milind schematic,i can converted graphic to nongraphic.display is ok but not booting with hard drive and pendrive.please help me.advance thanks

[laptopsrinivas]

Re: Dell n5010 can be converted from graphic version to non graphic

I finished the job. Unfortunately the laptop is giving white display. I can see that functioning of the laptop is ok.
I think i made some mistake. can any body help me.

[samanthban]

Re: Dell n5010 can be converted from graphic version to non graphic

This is from another site some one can try and let us know

 PU5301 > TPS51611
 PR5311 > 90.9K
 PC5313 > 2.2U 10V
 PC5314 > 68P50V
 PR5312 > 1.69K
 PC5315 > 22U 10V
 PR5325 > 18.7K
 PC5317 > 3300P 50V
 PR5301 ,PR5302 > 0 OHM
 PR5327 ,PR5332 > 330 OHMS
 PC5320 ,PC5322 ,PC5323 ,PC5324 ,PC5325 ,PC5314 > 33P 50V
 PC5321 > 22U 50V
 PR5331 > 29.4K
 PR5330 > 86.6K
 PR5328 > 24.3K
 PR5323 > 2.2 OHM
 PC5301 > 2.2U 10V
 PC5316 > 22U 16V
 PU5302 > SI7686DP
 PU5303 > SIR460DP
 PC5302 ,PC5303 > 10U 25V
 PL5301
 PTC5301 ,PTC5302 >330U 2V
 PR5313 ,PR5314 ,PR5317 > 0 OHM
 PR5319 > 1.69K
 PR5334 ,PR5335 > 100 OHMS
And also
1. R2001 > 2.37K
2. R1305 > 4.37K
3. R2603 > 0 OHM
4. L2602
5. RN2001 > 0 OHM
6. RN2004 > 0 OHM
7. RN2002 > 2.2K
8. RN2005 > 1500 OHMS
9. RN2006 >2.2K
10. R5407 > 0 OHM
11. R2309 > 10K
12. RN7702 > 0 OHM
13. R2601 > 0 OHM
14. RN5501 ,RN5502 , RN5505 , RN5507 , RN5509 > 0OHM
15. R2611 > 0 OHM
16. R2201 > 0 OHM
17. R2205 > 0 OHM
18. X2301 > 25 MHZ
19. R2303 > 1M
20. C2307 ,C2308 > 12P 50V
21. R3903 > 0 OHM
22. R3904 > 0OHM
23. Q3902 > PMBS3904
24. RN7704 > 33 OHMS
25. R3714 > 10K
26. RN7702 > 0OHM
27. RN2201 , RN2202 , RN2203 , RN2204 > 0 OHM
28. Q7701 > 2N7002EDW
29. RN7707 > 2.2K

[atsio]

Re: Dell n5010 can be converted from graphic version to non graphic

It is never going to work. There are a lot more thinks to do to make it work.

[ibrahim03]

Re: Dell n5010 can be converted from graphic version to non graphic

Are there any solutions ؟

[ibrahim03]

Re: Dell n5010 can be converted from graphic version to non graphic

If there was one can communicate with this Chinese site, there is his subject shows the success of the experiment


http://www.chinafix.com/thread-875435-1-94.html

[tirtha]

Re: Dell n5010 can be converted from graphic version to non graphic

Did it worked properly after the conversion?? Please reply if any one does it.

[ibrahim03]

Re: problem with Dell n5010 converted from graphic version to non graphic

I have the same problem.

[polytek]

Re: Dell n5010 can be converted from graphic version to non graphic

try to flash the ec bios U6202 it's near the cpu socket (MX25L2005C)

[aamkaachaar]

problem with Dell n5010 converted from graphic version to non graphic

hi Guys

i followed all the instructions and did the conversion...

Display comes fine and i can enter bios and do saves settings and all...


But ..... the laptop doees not boots up to post screen ......
neither it is able to boot with USB, CD , HDD or any other media ...

the display just hangs on a plane white screen after the Dell logo...

Alt+ CTrl + Del has no action.....


Even tried to flash the Bios ...with a good one .....but no use .....
the problem is the same ...

Thought that might be problem in particular motherboard ... i tried the same on another board

but ...struck on same page .....

any ideas guys

Waiting

[minhaj]

Re: Dell n5010 can be converted from graphic version to non graphic

thanks for sharing bro

[ibrahim03]

Re: Dell n5010 can be converted from graphic version to non graphic

thanks for sharing

I will try this .

[jaikumarpeddy@gmail.com]

Re: Dell n5010 can be converted from graphic version to non graphic

Thank you friends for your guidelines and images.
I will try this. Hope I get success in it.

[ala_borbe]

Re: Dell n5010 can be converted from graphic version to non graphic

after this, do you see DSC vga in device manager or is it like it does not exist?

[samanthban]

Re: Dell n5010 can be converted from graphic version to non graphic

Because an user requested them to me by pm, samanthban,
i'm posting the mobo images from n5010milind.pdf

Thanks my friend

[megaraider]

Re: Dell n5010 can be converted from graphic version to non graphic

Because an user requested them to me by pm, samanthban,
i'm posting the mobo images from n5010milind.pdf

[megaraider]

Re: Dell n5010 can be converted from graphic version to non graphic

Thank you megaraider I will try all and inform the result

Wish you success...!

[teknikbursa]

Re: Dell n5010 can be converted from graphic version to non graphic

Thank you megaraider I will try all and inform the result

[megaraider]

Re: Dell n5010 can be converted from graphic version to non graphic

All pages translated.
Attached both Intel and Amd schematics.

[megaraider]

Re: Dell n5010 can be converted from graphic version to non graphic

Nearly any recent laptop mobo with hybrid configuration (integrated and discrete GPU) can switch, by bios or software, manually or automatically, between them.
The old fashion manual GPU switching (which in my opinion is more beneficiary because both ati and nvidia utilities tend to lose a ton of their features when doing so) can be summarized:
1. Connect an external monitor to the laptop
2. Boot up in safe mode
3. Disable / uninstall discrete GPU device driver
4. Disable searching Windows Update for device drivers
5. Prevent discrete GPU software (GeForce, Catalyst) from starting up

Unfortunately there are still some older laptops around that can only use one GPU or the other and cannot switch between them.

Even worst, some manufacturers don't lose an opportunity to save a few cents and skip the installation of an insignificant number of electronic components. Thereby fully render inoperative the availability to switch between iPU and GPU.
Sadly Dell N5010, equipped with Wistron Berry mobo, falls in this late category.