Hello.
I need to change RT8239B but dont have one and china os min. two weeks. anyone knows interchange for it?
I need to change RT8239B but dont have one and china os min. two weeks. anyone knows interchange for it?
-
-
Re: interchange for RT8239B
up -
Re: interchange for RT8239B
maybe some info here
https://www.badcaps.net/forum/showth...highlight=listIm Back... sort of...
Comment
-
Re: interchange for RT8239B
nop no info thereComment
-
Re: interchange for RT8239B
I think up1589q close enough, but not sure 100%. Never have find UP datasheets.
Compare it on board view Asus x201 and x550CVComment
-
Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.
The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.
Original T-con:
Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.
First replacement T-con:
I thought it might be t-con and ordered new t-con from china(supposedly tested)... -
need bios for china laptop S06 C-A 5Y51 S06 MB VERC
-
Hi guys!
I'm new to TV repair and just started looking into troubleshooting guides and other online info.
Right now I have a Chinese make with LG display that is faulty. If I am not wrong I see two different problems here below.
1. There is a line(white/multicolored) at the very top of the display that shows thinner sometimes and slightly thicker in some occasions.
2. For any video the play freezes 1-3 secs and at the same time brightness goes low and returns to high when video continue to play.
From my initial research... -
Anyone knows compatible replacement for RT8239B ic marking code JC, i cannot find any ic same as mention, anyone knows compatible replacement. please help -
Hi & apologies if i have posted in the wrong section .
Is there a way i can view all of the threads started by me in one place , without having to search for them , or scroll through the other posts ?
Reason i ask is that sometimes i need to update a thread weeks after initial thread created due to time delay in waiting for spares from China , or lack of info at the time of posting .
Within a few weeks thread would have long disappeared from the fist page .
Thanks Zen
Comment