hi guys i need an advice on how to decide if the video chip of a laptop need to reball or need to replace.. and how do i know if the video chip is already damage?
-
-
Re: video chipset. reball or Replace??
First reflow gpu chip.if display comes just for testing purpose reball it.otherwise chances are you have to replace it. -
Re: video chipset. reball or Replace??
Don't do reflow at all, don't stress the chip more than you need, reflow will work in minor cases even if the chip could work after reball.
Just try reball, if it will not work, try change for other chip, that's itComment
-
Re: video chipset. reball or Replace??
I mentioned it before and I will again. If the chipset is not shorted most of the times it is good for a reball. The main problem is not the chipset but a deformed board due to long exposure of board and plastics that support it to excessive heat.
A lot of times I come across even and to deformed chipsets.Comment
-
Re: video chipset. reball or Replace??
By checking its power lines.Last edited by atsio; 07-27-2015, 07:05 AM.Comment
-
Re: video chipset. reball or Replace??
which bga reballing machine would be best considering reasonable price.Comment
-
Re: video chipset. reball or Replace??
To be honest, if you are into some practice DIY machine can be better and more long lasting then cheap IRDA machines, just my 2 cents.
P.S: Doing reballs with Preheater and hotair station 2 years and can do it 100% right every time
.
Comment
-
This is a guide that I am writing for helping others to replace their MEC1503 EC chip if it breaks (or to get around an inconvenient prompt to the BIOS). This forum has been extremely helpful to me so I would like to contribute to help others. I will tell you right now that this task is very difficult to do. You MUST have experience and tools to do precision micro-soldering, BGA reballing, trace repair, and general laptop repair skills.
There are some specialty tools needed to do this task. The replacement MEC1503 chips can be acquired from Aliexpress. Do not buy the bare chips as... -
Have this PS5 Slim with no video, HDMI connector was horribly butchered. but after replace i have no video. diagnostic said APU was overheating and now not responding,
checked fuses and all are good
any hint?...07-24-2025, 02:12 AM -
Common SPI bios chip programming Questions and Answers
----------------------------------------------------------
Q: I have a bios request,i can`t post my backup as i can`t read from the chip.
A: If you can`t read from it how do you expect to write to it ?.
Q: Why is my bios chip unreadable ?.
A: The programmer is faulty or has a worn or broken zif socket.
The USB cable is frayed,connector pins worn or some other physical damage.
Not enough amperage or voltage to power the programmer properly.
Bad...09-02-2021, 04:40 PM -
Hi
I try to repair a asus Asus X571GT (DA0XKTMB8C0) no power no lights.
I saw a burned (small hole in it) chip (JW10F) proberly a TPS22976DPUR, I removed it, now with power connected the laptop turns on and direct off again, power led and fn will light up.
I found on a donor lenovo board a G2898KD1U (wa9y), looks the same ..
Result is still the same, turns on and direct off again, first attempt is with backlight on all other direct attempts are only the power and fn led.
Could it be the chip is to diffrent to make the laptop work again ?
... -
Hello, anyone here have updated ezp2023+ chip database in .dat file format.
I need to add w25q256jveq chip but I do not know what data should I type.
I'm using the ezp chip dabase editor posted from here https://www.badcaps.net/forum/troubl...ro-programmers
The currenty unit model that I am trying to detect is HP elitebook 640 g9 which is currently locked on admin bios....11-25-2024, 12:53 AM
Comment