Hi I have a HP DV6-2064CA laptop. My son had dropped it a few months ago, and the fan needed to be replaced. I replaced the fan and put in new thermal pastes, SSD drive, etc. He does alot of gaming on it, and reached CPU temperatures over 80. recently. It stated freezing on him, and the hard disk crashed. The problem is that it will boot up ok, but if you power it down and then try to boot it up again it will shut down automatically. So I took it apart, re-applied the thermal paste, checked for any obvious issues or burns. Put it back together without the SSD drive. It will boot up into BIOS fine, I can run tests and it can reach 80 degrees no problem. But if I power it down, and power it back it will automatically shut down and not even go into the BIOS screen. I tested it more, and it looks not even to be heat related. If I power it up for a few seconds, then power it down. Power it back up immediately, it will power down automatically. If I wait a few minutes and power it back up it runs fine until I power it down again. Where do I start looking? CPU? Motherboard? Power button? I tried this on both battery and power brick.
Thanks for any help
Thanks for any help
Comment