Dell monitor model se198wfpf problem
this dell monitor se198wfpf got some issues. When I try pressing the menu button (to change color settings etc.) Nothing happens. 
I don't know what the problem is.
I don't know what the problem is.
-
-
Re: Dell monitor model se198wfpf problem
you can start by checking the button switch if functional. if good, follow the lines to where it leads. a schematic will be a big help.
also try posting your thread at troubleshooting computer displays, im sure a lot of experienced techs there can help you solve your issue. -
Re: Dell monitor model se198wfpf problem
Yes the button switch is functional. The menu settings just won't come up;
what do you mean "a schematic"?Comment
-
Hi Guys, i just have a question that is probably easy to answer if you have experience on such matters.
My Dell Monitors screen was damaged by lightning via the HDMI port. The monitor does come on but cannot display HDMI or VGA image. it says no signal.
I have ordered the board on Aliexpress. They say 100% working. Don't trust. it.
My question is, after installing the new board, is there anything else I need to do in order to make this board work. I know on some TV's you need to load software on the board to make it work but this is a monitor or even having to go into service... -
Hello, I have a Dell 15R-5521, with the problem that the Ctrl, Alt, Shitf and Num Lock keys do not work, I tested the keyboard with a keyboard tester and it is functional, I also got another new keyboard and the computer has the same problem with the same keys. Check continuity between the ZIF connector from the keyboard to the KBC and all pins are correct. I cleaned the ZIF connector and the KBC and I still have the same problem. I reinstalled windows just in case, and it didn't work. I updated the BIOS to the latest version A16 and there were no changes.
As additional information,... -
I bought this p2210f dell monitor to fix. Schematic is the same as p2210.
Behaviour is that monitors comes on but then backlight switches off almost instantly. If I look with flashlight I can still find the "No signal message". So definitely a backlight issue. Trying to advance the issue I proved that the protection circuit is switching off the backlight by shorting out C3 and resistor to disable the INL chip then re enable by removing the short.
This is where it gets interesting. When I disassembled the monitor to solder leads on c3 capacitor I noticed the backlight flickered... -
I have ACER Nitro 5 model AN515-51 main board model LA-E911P Rev 1A after replacing the mainboard keyboard stop working properly.
Some keys not working like Q,Z,C and some keys show deferent chr$ if i press K i will get I press D for F4 key etc...
i have tried all software issues like drivers test the keyboard on Windows 10 and Windows 11 and Linux with same problem.
I have check the keyboard connector on the mainboard every thing looks ok.
Then i replaced the keyboard with new one ......same problem exact same keys problem.
I need your advice if anyone face... -
Hello everyone,
so, I have this laptop Dell Inspiron N5110 with a heating problem on both CPU (I7-2680qm) and GPU (GT 525m), I tried many solutions, like changing thermal paste every month, using thermal pads on CPU and GPU, even using thermal pads on CPU nearby coils; but nothing worked, just minutes after booting the laptop shuts itself down so I thought it might be a short problem, so I decided to check what's going on, so I went online and some tutorial (general one) said to check inductors in order to find the shorted circuit, after checking (CPU removed), I found the culprit to be...
Comment