Simple question about sodimm modules

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Davi.p
    Hobbist Tech
    • Sep 2009
    • 4498
    • Italy - Milan
    #1

    Simple question about sodimm modules

    Hello, i wish to find a way to identify ram module by only the socket type, sometimes i go to the local eco isle and happens to catch someone that is throwing his laptop, but usually it has no memories, i get it but i have no parts to test all them, thanks.. bye

    ps: searched online, no info..
    Tags: None
    • Davi.p
      Hobbist Tech
      • Sep 2009
      • 4498
      • Italy - Milan
      #2
      ok i found wikipedia info on physical differences, but about frequency i have to find pc specific manual?

        Comment

        Previous template Next

        Related Topics

        Collapse
        • dr.thodt
          Lenovo laptops unstable with sodimm ram
          by dr.thodt
          For the second time this week I received a Lenovo laptop with onboard ram and one sodimm slot. Both laptops run stable from their onboard 4GB RAM, but turn out to be very unstable when there's a sodimm inserted in the slot.
          Both times it was a GS44D/GS54D NM-C711 rev 1.0 board.
          Both times there were no loose pins on the slot and it did not matter what sodimm I put in. It just artefacts and crashes randomly when there's extra ram.
          What I did notice is that almost all coils have very dirty phases one the mosfet side when checked with an oscilloscope. Not something I see very often....
          06-07-2024, 09:16 AM
        • ongobongo
          Ram Modules with undderfill - tricks for desoldering
          by ongobongo
          I'm working on another Lenovo E14 gen 2 AMD here which has a ton of errors with the factory soldered DDR4 ram chips. I do have a donor board here from which I'd like to use the modules and swap them. Unfortunately, the modules are glued down with underfill, which i have never worked with before.
          I tried with a lot of heat on the donor board but the modules won't come loose.
          Are there any hint or tricks when it comes to dealing with underfilled chips/ic that could help here
          Thanks
          Ongo
          06-02-2024, 02:18 AM
        • harp
          simple win network with optimization issue
          by harp
          simple win network with optimization issue I like to ask some question about configuring simple room win network. So, there is 2 win computer, android4 device and wifi router not connected to internet. The purpose is storage space and manipulation with large files between any device. 1 pc - 192.168.0.2 (winxp sp2) wired to router port#1 2 pc - 192.168.0.5 (win10, enabled smb1.1) wired to router port#2 3 router - 192.168.0.1 with dhcp for wifi (192.168.0.101...) 4 main tablet - 192.168.0.101 (android4) wified to router wifi port I generally work and control transfer with my tablet via ES3 file...
          06-23-2025, 11:01 AM
        • gabrielA7
          Zotac GTX 1080 8GB / No video / Error reported on all memory modules!
          by gabrielA7
          Hi guys!!

          I have this video card on my bench, it turns on and the screen goes black!

          I used MATS but it showed an error in all memory modules, when writing!

          I once got a 1060 with the same symptom, all modules were defective, I rebaled the GPU and it stayed the same.

          Remember that I have all the debts ok, 1.35 Vram and such!

          Could the problem really be in the GPU?

          Could it be the BIOS?

          Thank you in advance!​
          06-05-2025, 09:04 AM
        • harp
          simple DIY voltage monitor
          by harp
          I am designing a simple circuit that can catch a narrow glitch in voltage fluctation, and presented in visual/audio way, with as little as posible common type components. The circuit is done on test board and work like I wish. I post schematics here and like to hear a voice of educated electrician, hopefully to insight of some flaw or better design. Thank you ...
          09-02-2025, 01:20 PM
        • Loading...
        • No more items.
        Working...