Macbook Pro a1990 activation locked

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • falcontech
    Badcaps Veteran
    • Oct 2013
    • 477
    • italy

    #1

    Macbook Pro a1990 activation locked

    Hi,
    I received a 2018 MacBook Pro A1990, and the motherboard was replaced, presumably purchased on AliExpress. The motherboard's activation is blocked because the previous owner didn't delete it. Does anyone have a solution to this problem? I called Apple, and as expected, they asked me to activate the process with proof of purchase for the original computer, which I find very difficult, so the proof of purchase from AliExpress will be of little use. Any suggestions? Thanks.
    Last edited by falcontech; Yesterday, 06:59 AM.
  • reformatt
    Badcaps Legend
    • Feb 2020
    • 1456
    • Australia

    #2
    If you are planning on doing this for a customer or selling it, I would return it for a non locked board. You can use a activation bypass from Checkm8, however this is a paid service. Remember that the lock is on Apple's side so if the MAC is erased again, it would need to be bypassed again. It's a one off payment though I believe.

    The activation lock is linked to the T2 on the board BTW, so you have to swap that with one from a unlocked board to circumvent it.

    Comment

    Related Topics

    Collapse

    • alfredodinolfo
      MacBook Pro 2019 (A1990)
      by alfredodinolfo
      mb code:820-01827-A;
      sn:C02Z349ALVDR;
      i9 32GB Ram 1TB

      Hi, I found short on one of 6 black nand (total 1TB).
      i removed all 6 nand ( voltages all ok) and now i want to program with JC P15 but for A1990 2019 there is only 512GB configuration.
      I try A2141 1TB configurazion with TSB4228 but the position on pcb is different ( U9300 and U9400 is no stuff on A1990 but present on A2141 and U8800 and U8900 is no stuff on A2141 but present on A1990 )
      macbook with A2141 configuration run on recovery but don't complete it.​
      anyone can help me?
      05-26-2025, 09:27 AM
    • robka
      MacBook Pro 2018 - A1990 Dead - not charging - only 5V
      by robka
      Hi,

      my MacBook Pro 15" 2018 Touch Bar (A1990) doesn't charge anymore. Board# 820-01041-A

      I'm not experienced in diagnostics, but I want to try to solve the problem with your help, because every local shop charges around 600€ (650 usd). Which is the value of the whole Macbook.

      The Macbook was charging when suddenly the "charging sound" appeared every other second for around 4-5 times.
      After that the Macbook was dead. It isn't charging anymore.

      The USB-C Port where the charger was plugged is burned. Also The Cable and the...
      03-02-2024, 02:58 PM
    • DATATECH85
      Macbook Pro A1990 - 820-01041 Stuck at 5V / 0.02A
      by DATATECH85
      Hello,
      I am currently working on a Macbook Pro A1990 (motherboard 820-01041) which is not charging.
      The Macbook consumes 5V and 0.019A at USB-C. There seems to be a partial short-circuit on the PPBUS_G3H rail as I have 0V on this rail.

      I've physically separated (by removing F7000 and F7001) PPBUS_G3H and the ISL9240 charging chip to see which side the short is coming from. Removing these fuses gives me 12.6V at the output of the ISL chip (PPVBAT_G3H_CHGR_REG).
      However, I can't work out exactly why I don't have the PPBUS_G3H rail.

      Here are the values...
      07-24-2024, 06:34 AM
    • Cameron Kajohn
      A1990 MacBook no power help
      by Cameron Kajohn
      I have a a1990 2018 15 inch MacBook Pro that will not power on.
      I have replaced the pch bga chip because it was heating up under my thermal camera.
      I have replaced the battery, and replaced the small ic between the gpu and cpu as it had a direct short to ground.

      the MacBook now pulls 20v 2.4amps the trackpad clicks but it does not ever attempt to power on not even fan spin. After PCH replacement I was able to get it in dfu mode 1 time and restore bridge OS, but now the MacBook will no longer go into DFU mode.

      I have also noticed L7030 gets extremely hot yet...
      01-24-2024, 12:00 AM
    • Loading...
    • No more items.
    Working...