Need help identifying component

[Stefax2001]

Hi, i need help identifying component on HP x360 440 G1 motherboard ( Rumble 17869-1)

[mon2]

Part number with 'X' are usually for Crystals / clock oscillators.

From BV, confirmed the part is a crystal - since the power rail is not showing in the BV, the part is not an oscillator which will require a power supply.

The pin # shows as 24 so most likely a 24 Mhz crystal but not sure of the physical size. It could be a 2x3mm SMD crystal. You can measure with a micrometer and share the dimensions.

[NightcoreSenpai]

Mfg Code: XTAL-24MHZ-182-GP082.30006.0531 OSC-3225-4P-3H36

someting like:
https://www.digikey.de/en/products/d...-L-R-T/2637768

[Stefax2001]

Part number with 'X' are usually for Crystals / clock oscillators.

From BV, confirmed the part is a crystal - since the power rail is not showing in the BV, the part is not an oscillator which will require a power supply.

The pin # shows as 24 so most likely a 24 Mhz crystal but not sure of the physical size. It could be a 2x3mm SMD crystal. You can measure with a micrometer and share the dimensions.

Thank you for quick and detailed answer.
Dimensions are 2.5x3.2mm.

Mfg Code: XTAL-24MHZ-182-GP082.30006.0531 OSC-3225-4P-3H36

someting like:
https://www.digikey.de/en/products/d...-L-R-T/2637768

Thank you.

[Stefax2001]

Update, after cross referencing x360 440 G1 board with schematics and boardview of elitebook 840 G6 (Both being 8th gen/sharing same CPUs) i think i found the matching crystal,could someone confirm this?

Link to schematic & boardview https://www.badcaps.net/forum/docume...itebook_840_g6

[Stefax2001]

Transplatation successful, i stole X4751 from dead EliteBook 840 G5 motherboard, x360 440 G1 now starts and enters bios. I still need to reassemble the laptop and check if it really works as intended.

mon2 and NightcoreSenpai, thank you.