-
-
Re: ENE KB9010 9012 9016 programmer
thanks -
Re: ENE KB9010 9012 9016 programmer
If you need to change the KB9012 chip, it must be programmed before it will work. Just bought it, but have not used it yet.Comment
-
Re: ENE KB9010 9012 9016 programmer
i kind of got that,
what i wanted to know, is what the chip does and how common it is.
because i cant recall seeing the part number before.Comment
-
Re: ENE KB9010 9012 9016 programmer
with the one mentioned above , want to buy programmer for KBC. any one here have already used one of the three.
got already EZP2010 programmer but it is only for eeprom chip .
http://svod.od.ua/produktsiya/124-programmer-kb9012
http://www.ebay.com/itm/Brand-New-LC...item35d9d648aaComment
-
Re: ENE KB9010 9012 9016 programmer
@spidey ??????Comment
-
-
Re: ENE KB9010 9012 9016 programmer
Check this why you cant make this one
http://monitor.net.ru/forum/postal2-...fo-436716.htmlComment
-
Re: ENE KB9010 9012 9016 programmer
guys i want "ENE kb9012qf a4" file to programme please help me
motherboard is dell inspiron 15 3531 LA-B481P
could anyone can help me pleaseComment
-
Re: ENE KB9010 9012 9016 programmer
i bought this programmer(85$) and is very helpful for new model (ACER DELL P.BELL ecc) but most of case need to replace first with new KB90.. ir ITE after to flash this ec chip.
I use this opportunity to appeal to download the file for this programmer:Comment
-
Greetings badcaps community,
I havent done this for a long time and want to start it all again, after some evil and annyoing illness.
So I apologize in advance, if some phrases might sound a bit like gibberish or illogical to you.
Im trying my best to fully describe what I plan to achieve and hope I was choosing the right sub-forum for my new adventure.
I have a Elitebook 820 G1 and a Elitebook 840 G2 here.
These ask for a password when entering the BIOS, but boot just fine from the internal SSD.
I learned that desoldering...10-29-2024, 06:03 AM -
This is a shot in the dark, but I was just using my RT809H programmer and it got stuck in a certain state so I power cycled it. Now, the device LED just flashes quickly and does not connect to the software. I've tried to update the BIOS of it and it fails. I went so far as to remove the ROM from the programmer itself but it's some weird chip (I believe ATMEL, but I can't find any datasheet on it) so I've been unable to read the BIN from it w/ my other programmer. Chip has ATMLHC4C56BM CN written on it (I think). I'll upload an image. I have the programmer's BIN ready to program it manually. Anyone... -
Hi has anyone got the latest software for the TL866CS MiniPro EPROM programmer version 03.2.86 is installed now i have tried the update site in the programmer software but it wont connect to their website i am running windows 10
Edit found this site programmer works now http://www.xgecu.com/EN/Index.html -
I was curious if the T2 chip serial being changed would allow cracking the Firmware lock and icloud lock of a device? We came across the T2 Rom Tool and this allows the use of changing the serial which in our experience would allow removal of MDM on older models (2017-and older). Would that isolate the icloud bypass since it is married to the serial of the T2 chip? Curious since we are close to pulling the trigger on a wholesale lot and we anticipate iCloud devices in MacBooks etc. Piernov or anyone have thoughts on this?
Update: People are saying yes and no. If you change the serial... -
Looking to up my game a little bit, but these programmers seem a bit daunting.
Trying to get a device for EMMC repair, and it's very difficult to lookup all the words to find if I'm on the right track lol.
Trying to reprogram EMMC on Sony/Hisense mainly but would like to hit a few other brands.
My question is would either of these work? And is there a specific card reader I need for TV emmc? There is like 10-40 additional pieces that I can get but not sure what I actually need for my application only.
I may do eeprom as well. Can someone point...
Comment