Hello everyone
Turbo-X laptop, same motherboard as LG R590.
Laptop came after water felt on keyboard, turns on, fan start spinning for 1-2 seconds but nothing on screen(internal+external)
Clean all the board with Isopropyl.
All voltages seems ok, except VCORE voltage is 0-0.4
GPU and CPU get hot as usual but fan wont startup again, only at boot(55 C temp after 2-3 minutes)
I change ISL62882(CPU POWER IC), same readings(see attachment)
Also attached schematic!
Any ideas?
Turbo-X laptop, same motherboard as LG R590.
Laptop came after water felt on keyboard, turns on, fan start spinning for 1-2 seconds but nothing on screen(internal+external)
Clean all the board with Isopropyl.
All voltages seems ok, except VCORE voltage is 0-0.4
GPU and CPU get hot as usual but fan wont startup again, only at boot(55 C temp after 2-3 minutes)
I change ISL62882(CPU POWER IC), same readings(see attachment)
Also attached schematic!
Any ideas?
Comment