DANL5JMBCC0 REV:C does not see hard disks

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • altuntabak
    Member
    • Jan 2023
    • 17
    • türkiye
    #1

    DANL5JMBCC0 REV:C does not see hard disks

    Hello, you need help with something. You have a DANL5JMBCC0 REV:C model motherboard. While the m2 ssd was being removed by the user, the screwdriver was in the wrong place. The product came to our service. Its own m2 ssd is damaged. When I insert a new ssd, it does not see the sata hard disk. I get 5v output from the port, but it still doesn't see it and the disk motor doesn't rotate.

    When I plug in the new M2, it sometimes sees it and works, but most of the time it doesn't see it.
    Attached Files
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • federalhouse
      **Need Help Unlocking BIOS and Hard Drive on Dell Precision 5820 Tower**
      by federalhouse
      Hi everyone,

      I'm in need of assistance with a Dell Precision 5820 Tower. The BIOS is locked with "Dell Security Manager," preventing access to the HDD-1 hard drive.


      **Background:**

      I recently purchased this Dell Precision 5820 Tower from a recycler who salvages equipment from abandoned office spaces. The computer was left behind by its previous owner and was password locked. Given that it can run Windows 11, I saw this as an opportunity to upgrade my setup.


      **What I've Tried So Far:**


      1. I accessed      ...
      1 Photo
      08-01-2024, 07:03 PM
    • abajor
      Evaluating Mechanical Hard Drives SMART Data in Linux (Ubuntu) Using the Disks Utility.
      by abajor
      I've gotten into the habit of Looking at peoples Mechanical Hard drives with a Ubuntu thumb drive to boot their system.
      I understand the raw values are not really uniform between manufacturers, but I have noticed that high seek and read error raw values at the very least correlate to a drive that is going to have sub par access time, and extremely slow OS booting.
      The odd thing is I've often seen very high seek and read error rates on drives with fairly low on time.

      Does anybody have any other takes on evaluating smart data? I've used Crystal Disk Info, It seems to present...
      04-23-2024, 11:43 PM
    • ash91
      Hp pavilion 15 not detect hard drive
      by ash91
      Hello gentelmen .... this is my first post and sorry for my bad english,

      so my proplem is my laptop keep losing hard drive even if i but the
      hard disk in the cady (the box that can replace the dvd rom with hard disk)
      when i turn the laptop on the massage that said no boot media found pop on
      the hard disk is fine and to be sure i try another hard
      i also update my bios to the last update
      the 5 volt is present on the hard connector on the motherboard
      the dvd rom work fine when i but a windows dvd in it
      also when i boot from flash...
      06-07-2023, 01:45 PM
    • madura2010
      DAY11AM6E0 hard disk drive and optical disk drive not detected
      by madura2010
      Today recieved hp model 17-f100nx laptop with no power.(motherboard=DAY11AMB6E0) after that repaired +1.05v section due to faulty buck converter.after that power issue fixed and laptop turns on.But "no bootable 3f0 error displayed".so then

      i checked the connectivity of ribbon=good communication with hard and motherboard

      changed hard disk and checked=3f0 error persist

      sata power=+5v available

      Then checked data capacitors=all good

      Then checked data lines path connectivity to pch=all good

      reflashed...
      03-12-2023, 09:09 AM
    • odie34
      Sony OLED XR-77A80J - 5 Flashes But Turn On After Hard Reset
      by odie34
      I am a hobbyist (not a professional) so please be gentle...

      I recently received an XR-77A80J that wouldn't turn on. (Repeating 5 flashes when plugged in.)

      I did a hard reset by holding the power button for about 30 seconds until the set powered down. I then tried to turn it on and it powered up, bringing me to the setup screen. There's not a lot of detail on the setup screen but the picture didn't have any distortions, so at least a cursory examination suggests no physical damage to the screen. The set appeared to be working normally, but it shut down after about 15 seconds,...
      02-18-2024, 09:11 AM
    • Loading...
    • No more items.
    Working...