Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Thank you very much...
-
Hello friends, there is a bios password on the x1403za r3.1 motherboard. Can you help me clear it? I am adding the original bios.
sn:S1N0CV12627704C...
Leave a comment:
-
DANL5JMBCC0 REV:C does not see hard disks
Hello, you need help with something. You have a DANL5JMBCC0 REV:C model motherboard. While the m2 ssd was being removed by the user, the screwdriver was in the wrong place. The product came to our service. Its own m2 ssd is damaged. When I insert a new ssd, it does not see the sata hard disk. I get 5v output from the port, but it still doesn't see it and the disk motor doesn't rotate.
When I plug in the new M2, it sometimes sees it and works, but most of the time it doesn't see it....
-
Sorry for the delay, videos of 2 separate situations
[url]https://youtu.be/dEYaCp6b-fo?si=1o7hhr1wcmh0KrkA[/url]
[url]https://youtu.be/NRfppuAA1iA?si=LAZ0_hH1LKBuq0y-[/url]https://Sorry for the delay, videos ...LKBuq0y-[/url]Sorry for the delay, videos of 2 separate situations
[url]https://youtu.be/dEYaCp6b-fo?si=1o7hhr1wcmh0KrkA[/url]
[url]https://youtu.be/NRfppuAA1iA?si=LAZ0_hH1LKBuq0y-[/url]https://Sorry for the delay, videos ...ate situations
Leave a comment:
-
I did what you said, but the result is still the same, the password is not removed.
[ATTACH=JSON]{"data-align":"none","data-size":"full","title":"dataurl282606.png","data-attachmentid":3315338}[/ATTACH]I did what you said, but the result is still the same, the password is not removed.
[ATTACH=JSON]{"data-align":"none","data-size":"full","title":"dataurl282606.png","data-attachmentid":3315338}[/ATTACH]...
Leave a comment:
-
I did chip cleaning and the result is still the same.
I tried with an empty password, I tried ctrl+alt+delete, still the same.
I tried f10 by changing the password to 123456. It kept giving me an error. I passed the errors with enter and restarted, but the result was still the same. I couldn't remove it. Could there be another solution?
Leave a comment:
-
hello lenovo t14s gen1 nm-c891 rev:1.0
I think you are talking about the blank password, which I understand without clearing it. I tried it with enter. The same result (Did you clear the security chip?) I couldn't understand what you mean. When I get the errors, when I press enter a few times, it restarts, but nothing changes, the result is still the same.
Leave a comment:
-
First of all, thank you for your answer, I created 123456, but with ctrl+alt+delete the result was the same again.
When I try 123456 f10 again, I get the same error and it doesn't work.
Leave a comment:
-
Hello friends, first of all, maxpower, I would like to thank you for this work you have done, I have followed the information you have given (Don't save with F10, just clean Pwd with enter twice.) If I do not press f10, nothing changes when I restart, if I press f10, I constantly get an error and it does not save and changes. Nothing is happening, can you help me with this?
[ATTACH=JSON]{"data-align":"none","data-size":"full","title":"dataurl164647.png","data-attachmentid":3314655}[/ATTACH]Hello friends, first of all,...1 Photo
Leave a comment:
-
Hello, this bios worked for me, but I am getting the DMI error. My old bios is here. Can you help me? Can I know which program you used to make it? I am constantly dealing with this problem. [ATTACH]n3234074[/ATTACH]...
Leave a comment:
-
Re: Hp 250 g4 la-c811p kb9022 dump required
hello friends la-c881p rev 1.0 had a problem with this model not turning on. There was b+ but there were no 3v and 5v outputs. The problem was caused by the crack at the end of the charging socket. I'm sharing for information purposes also kbc is difficult for this model, I'm adding it here...Last edited by altuntabak; 07-07-2023, 07:23 AM.
Leave a comment:
-
-
Re: HP 260 G2 anakart 6050A2803501-MB-A01 bios
hello this bios worked for me but serial numbers are missing i am throwing old bios if you can help i would appreciate it
sn:4CH6368VKT...
Leave a comment:
No activity results to display
Show More
Leave a comment: