Re: MSI CX700 MS-17311, hannstar E89382
My Samsung N150 plus intermitent power on and as of today no display.any body can healp
My Samsung N150 plus intermitent power on and as of today no display.any body can healp
-
Hi everyone! I need BIOS for Toshiba L775-13K (PSK3WE) Hannstar J MV-4 94v-0 e89382 (4MB BIOS) with nvidia gpu. I searched the forum a lot but couldn't find it.
BIOS i backed up from motherboard with ch341a.
Many thanks to all who will help!... -
Hi, i have an ASUS PRIME Z590M-PLUS board, which had an shorted Z590 chipset. I have succesfully exchanged the chipset to a factory new one, however there is a serious problem with the Intel Management Engine (later on: ME) not beeing activated after the chipset device replacement.
For lower chipset families (on ASUS boards) it worked to program the oldest bios version into the SPI rom, and the bios had activated the Management Engine itself by default - there was a message on the screen prior booting - "BIOS is updating Management Engine ..... . Do not shut down to prevent... -
...*MOST COMMON I.C FOR LAPTOP*
*YOU SHOULD HAVE IN STOCK*
*Charging IC
8682L OZ8682L OZ8682LN QFN-16 Chipset
OZ8681LN OZ8681L OZ8681 8681 8681L QFN-16 Chipset
ISL88731CHRTZ ISL88731C 88731C QFN-28 Chipset
ISL88731HRZ ISL88731QFN-28 Chipset
ISL6251AHAZ ISL6251A ISL6251 SOP-24
ISL95521HRZ ISL95521 95521HRZ QFN-32 Chipset
AXP288 QFN-76
AXP288C QFN-76
CD3301 CD3301RHHR QFN-36 Chipset
CD3301BRHHR CD3301B QFN-36
BQ24705
BQ24707 BQ707
BQ07A BQ24707A QFN-20
BQ715 BQ24715 BQ24715RGRR -
First of all, if it says HannStar E89382 on the board does that mean that the board is HannStar or it could be Compal?
Because I've gotten two different so called schematics off the internet and none of them has same components as in the boardview.
FlexBV fials to work and my brain fails to work in manual search mode, nothing found on boardview can be found in schematics.
Which schematic do I use?
Where do I look for thingy that generates 3.3V for me?... -
I believe Chip 2 is BIN is the main one as it contained the Windows product key, marked with XXXXX for now.
SN: PF3G1REP
MODEL: 20KW-00J1AU
PROBLEM: Turns on blank screen, charging circuitry motherboard looks good. I have tried another firmware here - but resulted in 5V will not go to 20v due to different PD firmware I believe - using the current firmware it does go to 20V.
Requesting a firmware clean/BIOS region cleaned. Here is output from ME Analyzer:
╔═══════════════════════════════════════════╗...
Comment