ASUS K53SV HannStar E89382 no 3.3V I need schematics

[u666sa]

First of all, if it says HannStar E89382 on the board does that mean that the board is HannStar or it could be Compal?

Because I've gotten two different so called schematics off the internet and none of them has same components as in the boardview.
FlexBV fials to work and my brain fails to work in manual search mode, nothing found on boardview can be found in schematics.

Which schematic do I use?

Where do I look for thingy that generates 3.3V for me?

[SMDFlea]

Re: ASUS K53SV HannStar E89382 no 3.3V I need schematics

You need the fz key,its on openboardview irc channel .

[u666sa]

Re: ASUS K53SV HannStar E89382 no 3.3V I need schematics

You need the fz key,its on openboardview irc channel .

To open FZ? I have FlexBV..

I need proper schematic for K53SV...

Look at PQ8802 for example...

NOT FOUND IN PDF... I'm thinking I have wrong schematics for this board and I need a proper schematic lul

[SMDFlea]

Re: ASUS K53SV HannStar E89382 no 3.3V I need schematics

Try the N73SV, i think its similar

[piernov]

Re: ASUS K53SV HannStar E89382 no 3.3V I need schematics

Asus is Asus (in most cases), HannStar is just the PCB manufacturer not designer. Asus board model number is written somewhere on the board, I guess K53SV too.
Most newer Asus don't have schematics available, have to do with boardview and repair guide only.

Schematics shown in screenshot is Quanta ZY9B, nothing to do with an Asus board.

[zribit]

Re: ASUS K53SV HannStar E89382 no 3.3V I need schematics

Try the N73SV, i think its similar

thanks for sharing, it helped me