MacBook Pro A2141 - macOS Kernel Panic

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • prw07
    New Member
    • Jul 2022
    • 7
    • Ukraine

    #1

    MacBook Pro A2141 - macOS Kernel Panic

    Mac crashes and restarts with kernel panic. No water damage on board. Board is clean. Memtest86 showing no errors. The installation Ventura or Sonoma is successful, but after 5-10 minutes of operation, the accident occurs again. Did a DFU restore and revive, twice with success and successfully reinstalled Sonoma. After 5 minutes of work Mac crashes with Kernel Panic. Apple Diagnostic (AHT) does not find errors.
    How to localize the problem ?
  • mon2
    Badcaps Legend
    • Dec 2019
    • 14238
    • Canada

    #2
    Details of the panic?

    https://boards.rossmanngroup.com/thr...-panics.60675/

    Comment

    • prw07
      New Member
      • Jul 2022
      • 7
      • Ukraine

      #3
      only this
      Click image for larger version

Name:	1.png
Views:	322
Size:	150.8 KB
ID:	3157849

      Comment

      • mon2
        Badcaps Legend
        • Dec 2019
        • 14238
        • Canada

        #4
        Don't Panic! Troubleshooting Kernel Panics in macOS (macsales.com)

        Comment

        • prw07
          New Member
          • Jul 2022
          • 7
          • Ukraine

          #5
          I can't log in macOS. Every time I get a reboot message and the laptop reboots.

          Comment

          • mon2
            Badcaps Legend
            • Dec 2019
            • 14238
            • Canada

            #6
            Try booting into safe mode to confirm if the unit is stable.

            Comment

            • Stephen
              Meow Meow MEOW!
              • Apr 2020
              • 667
              • United States

              #7
              I have seen this issue before, known GPU failure, it will boot in safe mode, but won't boot in normal mode. Usually a cause of a faulty GPU.
              sigpic
              MEOWING IN THE IMPOSSIBLE UNIVERSE!

              Comment

              Related Topics

              Collapse

              • tomtom67
                MacBook Pro 16" (2019) A2141: power consumption? Dead GPU? MacOS not installing
                by tomtom67
                A friend brought his fresh-from-ebay macbook pro A2141 after he failed replacement keyboard plugging.
                I fixed all the little problems he introduced.

                I am unable to install macOS to this device. Both Sequoia and Catalina (from Internet Recovery) start to install, but after ~2-5 minutes into the installation the macbook does a hard restart (max fan spin for a split second, then reboot without chime).

                I noticed what I think is a very high power consumption, like 20V/1.7A when activating WiFi for internet recovery, and more like 20V/3.7-4.1A while downloading the recovery...
                10-08-2024, 08:59 AM
              • sofles
                Macbook Pro 16" A2141 screen artefacts, kernel panic
                by sofles
                Hi there.

                I have Macbook Pro 16" 2019, model number A2141, motherboard number 820-01700. I have some problem with dedicated graphic card. When Macbook switches to dedicated GPU it is getting instantly hot and starts to show glitches on screen, then it freezes (trackpad is not clicking anymore) and shuts down.
                I tried to reinstall MacOS But it was a pain, it started to show glitches in middle of installation and I could not finish it. I only was able to reinstall MacOS when I put Macbook outside (it is winter and -2 Celcius).

                Now situation looks like this, If...
                02-05-2025, 05:05 AM
              • som_b1
                MacBook Pro a2141 not installing macOS
                by som_b1
                hello. I have 2141 on which I can't restore macOS. When loading, no buttons are active, it immediately wants to restore the Internet. But then I see an error 2100f. It doesn't boot from an external USB.
                I can't flash it through dfu because I don't know the version of macOS that was on it. Help
                By the way, for some reason it heats up inadequately and the coolers are at maximum
                08-04-2025, 03:49 AM
              • Wachenaggo
                Macbook Air 2013 820-3437 OSx Frozen and Kernel Panic Missing ME
                by Wachenaggo
                I got 2013 820-3437 that can't boot completely onto OSx and can load EFI ASD BUT can't on OS ASD and it gives this kernel panic error FAILURE missing ME. I already check ME disable strap HDA_SDOUT_R is low

                Also before I reflash the bios I was able to boot osx 10.9 maverick SSD from another client. But when I install a fresh maverick it is frozen.

                I already reflash bios using ch341 with clean me provided by piernov and 2informaticos then I even make my own using piernov's guide. some of those BIOS are boot looping the system.

                I also manage to damage...
                03-29-2022, 07:36 AM
              • Simplebeans
                MacBook Pro A2338 keeps restarting when attempting to install macOS
                by Simplebeans
                I have just got in a MacBook Pro A2338 which was initially displaying the Apple logo followed by an explanation mark in a circle as described here:- https://support.apple.com/en-gb/102164.

                After some error messages attempting to revive and restore the machine via DFU mode i have finally got the machine revived however now the issue seems to be when attempting to install macOS Sequoia via a bootable USB installer or via macOS recovery the machine just keeps freezing and restarting before the installation is complete, usually the installation has just started or is mid way trough before...
                Yesterday, 11:04 AM
              • Loading...
              • No more items.
              Working...