Hello, I am looking for an equivalent to the NCT7717U, it's a thermal sensor on an ASUS X553MA motherboard, can you help me?
Crossover for NCT7717U Thermal sensor
Collapse
X
Related Topics
Collapse
-
by GcnewbieForgive me this is my first request for help on this forum, so if i've screwed up or not followed the rules i should have i apologise profusely.
I have a Dell Latitude 5570 that was randomly shutting down, on further investigation i found that the machine had been shutting down due to thermal events as noted by windows event viewer.
My investigations lead me to the dell diagnostics screen, where i found that there were two sensors out of range which had been causing the shutdowns, one of which was the GPU thermal sensor and the other the ambient sensor.
I opened the...03-29-2024, 06:55 AM -
by CapLeakerGot a new victim:
AcuRite 5 in 1 Iris outdoor weather station not updating the temperature / humidity anymore. The original sensor is a SHT21. Also there are identical other sensor manufacturers. I chose the HTU21D to replace the original SHT21. Both have identical specs. I've had two failure modes with these sensors.
A: outside temp stuck at -40?It's cold here at times in Canada, but not that cold!
B: stuck at some temperature and maybe updating once in 12 hrs or so.
Easy solution is to go to AcuRite website and purchase the sensor. Right?...
-
by hummelHi,
I need help finding the thermistor/sensor responsible for ambient temp. detection in E7440. The laptop randomly powers off with thermal event "ambient thermal sensor -148*C". I have schematics and board view but unable to determine which component is responsible for sensing the ambient temp. I simlpy don't understand how it work from the schematic below:
Could somebody more experienced help?
Schematics and board view attached.
https://www.badcaps.net/forum/troubl...heory/troubles... -
by Veyron7887Hi. I have Asus X55C laptop from year 2013. It has i3-2328M CPU. I replaced stock thermal paste with high quality thermal paste. Before thermal paste replacement, I measured CPU temperature Around 65-70 degrees Celcius with stock thermal paste. If after the replace thermal paste, I measured CPU temperature around 80-84 degrees Celcius and fan don't stop when system is idle. I replaced the thermal paste several times but still did not change. Where is the problem?
-
by groomitHi,
I just replaced the battery on a Google Pixel 5.
After that the proximity sensor isn't functioning properly any more. It is constantly activated. So when playing a voice message on Whatsapp, the Screen instantly turns off.
Checking with a sensor app I can verify weird behavior of the sensor. It is triggered when nothing is near and sometimes works correctly when squeezing the phone next to the sensor hole.
The rubber seal is on again (as mentioned in various suggestions in other forums).
This smells like a cold or broken solder joint. So I'd like to reflow... - Loading...
- No more items.
Comment