-
-
Re: Utility
pfff
i had a packard bell with no power.
like it will PW up and there was no good voltage on power button ; it was like near 2V.
after reflow power up like a champ.
maybe maybe
p.s. why did i say about that pc bell beacause it had the same case like acer and asus K series ... wierd right?
when i took it apart i swear it was like opening a asus/acerLast edited by dj_ricoh; 10-18-2013, 04:39 AM.Just cook it! It's already broken.Comment
-
Re: Utility
The programming work perfect I did copy the BIOS from a g6 and version and I writer manual with a programmer and it work.
On the other side the HP got other problems.
Just wanted to say that if you got a same notebook you can copy the BIOS and write it manual.
Red point for this software.Just cook it! It's already broken.Comment
-
Re: Utility
Not yet... please if have post it tks...Comment
-
Re: Utility
This soft know how to read all bios . You need to costumize the capacity of your bios when readind if the soft don't detect it automatically .Comment
-
Re: Utility
dj ricoh> "i bought and destroy a lot o clips so i can read the bios chips because i have a lot of notebooks in my hand "
u did not have this?
http://www.ebay.com/itm/New-SOIC8-SO...item3a90fb3ab5Comment
-
Re: Utility
100% working biosComment
-
Hello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
07-24-2025, 02:17 PM -
Hello everyone,
I am requesting urgent assistance to unbrick my laptop, a rebranded TongFang GK7MRFR chassis. The laptop is completely dead following a faulty in-OS EC flash attempt.
I have successfully used a CH341A programmer and can read/write/verify both flash chips, but using my backups/extractions has failed to restore power. The root cause is likely a corrupted Intel Management Engine (ME) region or an incompatible EC/BIOS pairing. System & Hardware Details- Barebone / Chassis: TongFang GK7MRFR
- MB: MB: GK5MP5X V1.0 Prod :GK5MRFV10T04201310281
- Rebrand: PC Specialist
-
First of all thanks to all of our members who have posted previously all methods posted here.
Please leave a comment if you find something new,or have anything else to add.
-----------------------------------------------------------------------------------------
Find by serial number,model number or series
If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
Operating system and OS version.If... -
Product Name: Razer Blade 15 (2022)
Product ID: RZ09-0421
Motherboard: CH580
BIOS Versions I work with: 2.02 & 2.06
Bios File Size: 32,768 KB
Dear Forum Readers!
I'm looking for a BIOS modder or anyone with experience who would give me suggestions about my razer blade's BIOS settings.
I can view and edit the content of the BIOS .bin file with AMIBCP BIOS editor.
The BIOS files I'm working with are from badcaps.net and those are CLEAN BIOS files (anyone can find it with the search string: RZ09-0421).
!!! MY RAZER BLADE...11-24-2025, 05:52 PM -
Hi, my laptop wont boot at all
With original bios no POST, only LED lights
With alternative BIOS from model TP500LN (flashed via programmer) the notebook works again
Some issues
A- with bios from 500LN, it won't update from bios of model 500LA (from 500LN v203 to 500LA v300)
B- If updated from 500LN version 203 to 300, the battery stops being recognized
Things I tried
1- Update / clear ME: Took the non working bios, made a backup, and did this: https://www.badcaps.net/forum/troubl...theory/trouble...
Comment