Alternative Component: IC

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • speedypro
    Badcaps Veteran
    • Feb 2013
    • 561
    • United Kingdom

    #1

    Alternative Component: IC

    Hi everyone

    I have here a Samsung GT-P7500. It has no power. Im looking for an IC: "8903CE TI203 ITHK +". It's not on the web anywhere. Can anyone share the alternative to use instead?

    Could not find a datasheet for it but found this on Mouser: http://uk.mouser.com/ProductDetail/M...IigyR6icslA%3d

    Thanks!
    Full-time computer repair tech (10am - 6pm) and full-time, (8am - 11pm), Ruby on Rails Developer
  • ben7
    Capaholic
    • Jan 2011
    • 4059
    • USA

    #2
    Re: Alternative Component: IC

    Originally posted by speedypro
    Hi everyone

    I have here a Samsung GT-P7500. It has no power. Im looking for an IC: "8903CE TI203 ITHK +". It's not on the web anywhere. Can anyone share the alternative to use instead?

    Could not find a datasheet for it but found this on Mouser: http://uk.mouser.com/ProductDetail/M...IigyR6icslA%3d

    Thanks!
    Wow, a galaxy tab that is broken?

    Have you checked all the voltage rails for shorts, or just no voltage/wrong voltage?

    Otherwise, the chip could be the problem. It is a battery charger chip.

    Also check the voltage from the battery terminals, to see if the battery is OK. If it is lower than 3v then I sugguest you replace it. When discharged too much, the LiPO batteries will bloat and possible blow up when charged again...
    Muh-soggy-knee

    Comment

    • speedypro
      Badcaps Veteran
      • Feb 2013
      • 561
      • United Kingdom

      #3
      Re: Alternative Component: IC

      Hi

      Sorry but the part is 8903CE TI150 ITHK +. But yea the battery is not the issue as without the battery is should still out put charging voltage. I do have a service manual and it leads to the IC being damaged. But I need the part. The mouser link above is the only alternative I've seen.

      And yes a Galaxy tab that is broken

      No voltage to battery so that would conclude faulty IC. 30-50 pin cable is ok.
      Full-time computer repair tech (10am - 6pm) and full-time, (8am - 11pm), Ruby on Rails Developer

      Comment

      • ben7
        Capaholic
        • Jan 2011
        • 4059
        • USA

        #4
        Re: Alternative Component: IC

        Originally posted by speedypro
        Hi

        Sorry but the part is 8903CE TI150 ITHK +. But yea the battery is not the issue as without the battery is should still out put charging voltage. I do have a service manual and it leads to the IC being damaged. But I need the part. The mouser link above is the only alternative I've seen.

        And yes a Galaxy tab that is broken

        No voltage to battery so that would conclude faulty IC. 30-50 pin cable is ok.
        NO voltage at the battery? That doesn't sound good!
        Muh-soggy-knee

        Comment

        Related Topics

        Collapse

        • Bowline
          Dell E6400 PT434 type Battery Charging Stuck at 1%. Battery Pinouts?
          by Bowline
          My question pertains to understanding the control circuity inside a Dell PT434 type battery used in Dell E6400, E6410 and other Dell notebooks?

          Does anyone have a circuit diagram for the inside of a Dell PT434 battery and/or a description of how the control lines work to control this battery?

          My reason for asking is I have a battery which I cannot get to charge beyond 1% in a Dell E6410 or E6400.
          The LED bar graph charge indicator on the battery shows one LED lighted when the info button is pressed.
          I have tried multiple different Dell power adapters. My Dell...
          06-11-2025, 10:13 AM
        • ruletero
          Acer a515-43 low battery charge voltage
          by ruletero
          Hi

          Acer A515-43
          LA-H801P

          Fail: Does not charge battery, has low voltaje on connector.

          Laptop didn't want to turn on, only charge led blinked.

          I found PQB5 (mosfet high battery charger) in short, voltaje in +12.6V_BATT was 19 v ...

          I changed it, changed PQB6 too and now battery charger voltage is 4.4V but battery is 3 cell, 11.25v, then is very low to charging.

          Laptop turns on without battery and works fine, but with battery turns on and turns off inmediately, I suspect battery bad but I don't know...
          10-24-2022, 02:31 PM
        • Sean Devine
          Cyberpower 1285AVR (CP1285AVRLCD) reporting wrong battery voltage?
          by Sean Devine
          UPS turned off one night and it seemed that the 3 year old batteries gave out.

          Replaced with a new pair, but the UPS software claimed the battery voltage was only 18 volts and needed to charge. After 24 hours, the UPS claimed only 60% charge and 20 volts (although FWIW, my meter sees 27v).

          ...then I found various Cyberpower threads here with some guidance on what to check.

          C1 (22uF) tested at 2, so I replaced that.

          Put it all back together and didn't see a change on the reported battery voltage. Although, I did run the quick battery diagnostic...
          03-03-2025, 08:23 PM
        • trepachka
          iPad Air A1475 Boot loops after replacing battery
          by trepachka
          This iPad was working fine except the battery was not holding charge for more than 40 minutes. I replaced it with a new battery. I haven't glued the battery yet, just inserted it into the slot and held it with battery screw.

          The iPad was powered on with the new battery and I am getting white screen with Apple logo for about 10 seconds, then the screen turns dark. It then cycles like this forever.

          I know the battery is working because the iPad continues to boot loop without the charger until it depletes to 0% and the message displays I need to plug in the charger.
          ...
          11-08-2024, 03:17 PM
        • sam_sam_sam
          Cyber Power ST625U Battery backup battery when bad so I going A123 type battery pack
          by sam_sam_sam
          I have had this battery backup for at 2 to 4 years now and the battery when bad and this is weird battery size it is the same length as a 12 volt @ 7 amp hour battery however the depth of is not the same as a 12 volt @ 5.5 amp hour battery

          I have several battery packs that are A123 batteries cell so I bought a lipo4 BMS balancing protection board for these batteries and I have a configuration that is 4S 3P these battery packs were 3S 2P so I reconfigured them but left the tabbing on one side of the battery row of battery cells and re-tabbed the other side to the configuration that...
          06-18-2023, 05:48 PM
        • Loading...
        • No more items.
        Working...