Compaq presario f500 power on problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • klkmalik
    seeking Tips
    • Nov 2011
    • 68
    • UAE

    #1

    Compaq presario f500 power on problem

    I have problem with Compaq Presario F500 , when I press the power button, leds light up for a second and switch off. Sometimes when I press ...SOMETIME FAN RUNING FEW SECOND AFTER OFF. ANYONE HAVE EXPRIANCE PLS ADVISE ME
    HOW TO TRACE FAULT? THANKS ADVANCE.
  • Duncanbest
    Senior Member
    • Jul 2012
    • 81
    • Taiwan

    #2
    Re: Compaq presario f500 power on problem

    FYR

    https://www.badcaps.net/forum/showth...highlight=f500

    Comment

    • Nocta
      Senior Member
      • Mar 2012
      • 117
      • Argentina

      #3
      Re: Compaq presario f500 power on problem

      I repaired a Compaq F700 yesterday with the same symptoms. It's the video chip.

      Comment

      • Berts
        Senior Member
        • Aug 2012
        • 55
        • Scotland

        #4
        Re: Compaq presario f500 power on problem

        Yes I would agree, video chips of course get hot and if the heat dissipation is not good, for whatever reason, bad air flow, poor chassis design then the chip will get so hot it can melt the soldier and pull off the board or create dry joints.

        Options are:
        Re-flow the chip with a modded cooling system.
        Re-ball the chip, expensive!
        New motherboard or graphics card.

        Beware though there are A LOT of models that have inherit problems so if it has happened once it will happen again!

        Comment

        • thesloc
          Banned
          • Dec 2011
          • 587

          #5
          Re: Compaq presario f500 power on problem

          This is a common issue especially among these compaq (HP) laptops with the nVidia or ATI chipset.

          If you don't own any reflowing equipment, literally pop the motherboard in a household oven for 8 minutes at 230C

          Let it cool undisturbed for one hr.

          Comment

          • bluestone
            Badcaps Veteran
            • Jun 2011
            • 343
            • Ghana

            #6
            Re: Compaq presario f500 power on problem

            this is a video chip problem, happens in almost all AMD laptops and Nvidia Chipset, try reballing procedure

            Comment

            • fddizon
              Badcaps Veteran
              • Sep 2011
              • 555
              • Philippines

              #7
              Re: Compaq presario f500 power on problem

              hi to all,

              does anyone has this laptops schematic? please share

              thanks a lot
              Francis

              Comment

              • lord
                Badcaps Veteran
                • May 2011
                • 319
                • Croatia

                #8
                Re: Compaq presario f500 power on problem

                Did you try google?
                Try to search with part numbers form motherboard components

                Comment

                Related Topics

                Collapse

                • theone111
                  Problem with LG Plasma 60PM6700 - Random power downs
                  by theone111
                  I have an LG Plasma TV 60PM6700 for the past ~12 years.

                  In the last ~3-4 months I have been having some issues.
                  1. Problem: It started with random picture disappearing (sound still worked).
                    Frequency: Happened about once a week.
                    Solution: Had to turn off TV wait a few seconds before turning it on again.
                  2. Problem: Then it got worse and the TV started to shut down and when turning on the no picture just sound.
                    Frequency: Happened about once a week.
                    Solution: Had to turn off TV wait about 10-20 seconds and turn it on again to solve.
                  3. Problem: TV shuts down
                  ...
                  07-22-2024, 10:36 AM
                • Duranitron
                  Asus x512dk rev 2.1 power on problem
                  by Duranitron
                  When I reflash again the bios of hoaca388 the unit powers on and the unit lives!!! Hooray!! All voltage in the coil 3.3v, 5v and 6.7v indicate charging are all present. including the cpu voltage , EEPROM and GPU voltage the unit is now alive, normal screen booting to windows and log in screen until I power it off. Then the unit never goes on even when pressing the power button in the keyboard.. Voltage reading 19v main , 3.3v VCC in IT8225E-128 and EEPROM VCC 0 volt and the charging voltage 0 volt.

                  Try to trace the power switch button goin to the power switch IC PU8803 (APL3533AQBI-TRG)...
                  11-26-2024, 10:22 PM
                • EazyBone
                  LG OLED55C9PUA power problem
                  by EazyBone
                  Hello, trying to fix C9 55 inch. I have pulled the back and all looks completely normal with nothing burnt so far. This is first time attempting to fix a tv so any help is appreciated.

                  Problem. I hit power button, red light on TV turns off and tries to turn on, no picture shows up and then shuts off. This occurred after house power turned on and off, not from a storm.

                  I have tested the power going from power supply to main board, all 12v and 20 volt readings are proper when I hit power button.

                  The power supply to t con is different story.
                  This...
                  06-23-2023, 07:43 AM
                • Dr.d
                  Help please..Lenovo ideapad 5 14itl05 power and charging problem
                  by Dr.d
                  I have a lenovo ideapad 5 14itl05, board LA-K321P, That will only power up on Battery only, or with battery disconnected and power adapter only. If battery is connected and usb-c power plug connected. It only works on battery and will not charge. I can however force it to charge by connecting the battery from a disconnected state while the power USB c plug is powering the laptop.

                  Additionally....to add to this strange situation. The usb-c power plug ONLY works to power the laptop on one side when inserted into the boards power usb c plug. If you rotate it 180 degrees, the board gets...
                  04-05-2024, 11:48 AM
                • sam_sam_sam
                  Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
                  by sam_sam_sam
                  I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

                  One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
                  03-31-2024, 02:12 PM
                • Loading...
                • No more items.
                Working...