Acer Aspire 4520 Power Problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • hexxer
    New Member
    • Apr 2011
    • 3

    #1

    Acer Aspire 4520 Power Problem

    I'm facing Acer Aspire 4520 With AMD Pros and nVidia chipset. The unit just turn on for a sec and off, no matter on battery or adapter or both the symptom just the same.
    I try to remove and reseat everything but didnt work, the only thing different is when I remove the processor the unit keep powered on.
    Anyone can help me to solve this problem?
  • Th3_uN1Qu3
    Believe in
    • Jul 2010
    • 6031
    • Romania

    #2
    Re: Acer Aspire 4520 Power Problem

    nVidia. That says it all. Reflow time.
    Originally posted by PeteS in CA
    Remember that by the time consequences of a short-sighted decision are experienced, the idiot who made the bad decision may have already been promoted or moved on to a better job at another company.
    A working TV? How boring!

    Comment

    • ablacon64
      Senior Member
      • Jan 2011
      • 89

      #3
      Re: Acer Aspire 4520 Power Problem

      He's right, it's the mcp76m soldering problem. But reflow will not do on this machine, go for the reballing or the notebook will stop working on a few weeks.

      Comment

      • 12ax7a
        Member
        • Oct 2009
        • 21

        #4
        Re: Acer Aspire 4520 Power Prob - acer experts please.

        Hi, I now have the same exact issue with an aspire 4530. Initially had nothing except the battery light indicator (working / charging) .. no turn on at all.. The Ti TPS51116 was bad - replaced it & now I have this exact behavior.. press power button .. lights up for 1 second and then off .. same behavior regardless of whether AC or battery... most of the fets & caps seem to check good.
        so:
        "it's the mcp76m soldering problem.."

        Is this pretty much the next step 99% of the time? 5 & 3 volt standby are good. Should there be any other constant standby voltages present on this unit? The 1.8Vsus is generated by this same (replaced) chip but it doesn't appear to be present in standby until after main power on button signal is generated .. true? Can anybody confirm this? It appears to require a 'wrap around' signal on S3 & S5 after turn on to stay on. I'm also wondering about the CPU health.

        Thanx.

        Comment

        Related Topics

        Collapse

        • Document Archive
          ACER Aspire Aspire G7200 Predator Defender Aspire 9750 Specification for Upgrade or Repair
          by Document Archive
          This specification for the ACER Aspire Aspire G7200 Predator Defender can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Aspire Aspire G7200 Predator Defender boardview and Aspire Aspire G7200 Predator Defender schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer...
          09-12-2024, 03:28 PM
        • Document Archive
          ACER Aspire Aspire X1300 Aspire Specification for Upgrade or Repair
          by Document Archive
          This specification for the ACER Aspire Aspire X1300 can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Aspire Aspire X1300 boardview and Aspire Aspire X1300 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or...
          09-12-2024, 03:28 PM
        • Document Archive
          Acer Aspire Aspire One 532h Netbook One Specification for Upgrade or Repair
          by Document Archive
          This specification for the Acer Aspire Aspire One 532h Netbook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Aspire One 532h boardview and Aspire One 532h schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or...
          09-06-2024, 05:27 AM
        • DenK
          Acer Aspire 5 A514-55 - won't power on, no charger LED, battery not flat - usual suspects?
          by DenK
          Dear all, I am trying to troubleshoot an Acer Aspire 5 A514-55 that won't power on. I'll describe the symptoms and my findings so far, and I would like to seek guidance and suggestions on possible suspects in terms of cause/component failure. My initial thoughts are battery charger IC and/or ideal diode/MOSFET (that switches between incoming DC and battery power), but I could be totally wrong on this.
          1) Laptop was working fine on battery, then user realised battery was running low. Plugged in AC adapter but noticed it was not charging (LED on AC adapter plug did not light). Eventually shut down
          ...
          12-06-2024, 01:29 AM
        • Bonaventure Vigil
          ACER ASPIRE A515-52G CAN ON BUT NO DISPLAY, NO POWER AT VCC_GT
          by Bonaventure Vigil
          Dear All,
          Please really2 need Help on this Acer A515-52G Motherboard Compal EH5AW LA-G521P Rev: 1A.
          At first this laptop can on, keyboard light on but no display. Open the motherboard, found out the PQZ3 Mosfet and PUZ3 ic near it burn. Refer picture below. Then I replaced both. All the power rail 3.3,5,1.2, 1.35, 0.8V have power back after i turn on the laptop except for the VCC_GT rail. Voltage at Power Supply showing 0.000A before turn on, after turn on it became 0.5 0.6A. Seem cannot boot and still no display. Then I replaced the PUG1 and mosfet, but the VCC_GT still no power....
          12-12-2024, 10:22 AM
        • Loading...
        • No more items.
        Working...