LA-3741P issue with TPS51120

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • rookieme
    Badcaps Veteran
    • Oct 2014
    • 396
    • Greece
    #1

    LA-3741P issue with TPS51120

    I need some help with this MB.
    Schematic available at
    https://www.badcaps.net/forum/showth...24#post1272124

    I have the 19,5V but not the 3,3 & 5 V.
    TPS51120 gets warm
    VREF2 = 2.00V
    VREG3 = 1,01V
    VREG5 = 4,99V

    so far I have replaced the TPS but with same results
    I cannot find any short
    I have removed PJP4, PJP5 & PJP12 and after the PQ4,PQ5, PQ6 & PQ7.
    the VREG still is low

    Could the second TPS I had to be faulty too? I don't have more to try.
    Tags: None
    • Techtiger
      Badcaps Legend
      • Oct 2014
      • 1601
      • france
      #2
      Re: LA-3741P issue with TPS51120

      Check if the +RTC_CELL /+3.3V_RTC_LDO & PC30 capacitor for any short And check the resistance to ground Diode mode pin 9/12/ 29/19
      Last edited by Techtiger; 09-18-2023, 04:04 AM.

        Comment

        • rookieme
          Badcaps Veteran
          • Oct 2014
          • 396
          • Greece
          #3
          Re: LA-3741P issue with TPS51120

          105K at PC30
          22K at +RTC_CELL

          I have also injected 3V at PC30 to see if anything heats up but nothing came out.

            Comment

            • Techtiger
              Badcaps Legend
              • Oct 2014
              • 1601
              • france
              #4
              Re: LA-3741P issue with TPS51120

              Maybe the TPS replaced is faulty or +3.3V_RTC_LDO line is connected to PC 118 / PU7 check these two components fault

                Comment

                • rookieme
                  Badcaps Veteran
                  • Oct 2014
                  • 396
                  • Greece
                  #5
                  Re: LA-3741P issue with TPS51120

                  PR160 is missing from the pcb and there is no connection between +3.3V_RTC_LDO and the PC118 / PU7

                  TPS could be faulty but it's strange that it has same output with the original one

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • rounin
                      MacBook Air A2337 (820-02016) USB-C Port Issue – Only Works in One Orientation (CC Line Problem?)
                      by rounin
                      Hi everyone,

                      I'm working on a MacBook Air 2020 (A2337, board 820-02016) and running into a strange USB-C issue. I've gone through quite a bit of testing and part replacement, but I'm stuck — hoping someone here can shed some light.

                      🛠 Original Issue
                      The machine initially wouldn't negotiate 20V over USB-C — stuck at 5V.
                      Diagnosis showed PP1V5_UPC0_LDO_CORE shorted to ground.

                      I replaced U3100 (UF400) using a donor board (A2179), and the machine powers on fine now.

                      ⚠️ New Problem: One USB-C Port Only Works in One Orientation...
                      04-19-2025, 01:18 AM
                    • ugamazing
                      Three 820-01700 32GB Logic Boards Same Issue: Won't Wake From Hibernate
                      by ugamazing
                      I have three identical-spec 820-01700 boards (2.6/32/512), and ALL THREE boards came to us with the same fault, from different sources: The boards don't wake from hibernation with the keyboard or lid, they ONLY wake when you press the power button. I understand this is a very minor issue, but the boards must be fixed!

                      We will of course begin with the obvious (checking lid signals), but I couldn't help but notice these three boards were all 32GB variants. Has anyone noticed an issue relating to these 32GB boards in particular? I of course don't think it's a RAM issue, but it's bizarre...
                      12-17-2024, 07:05 PM
                    • elmark
                      HP 15-cw1002ua strange keyboard issue
                      by elmark
                      HP Pavilion 15-CW1002UA
                      S/N 5CD0251CBC
                      P/N 7KE54EA

                      Hello guys!
                      I have a strange issue with my laptop keyboard and I'm lost trying to detect what's wrong - the KB9028Q-C or the keyboard itself.
                      It powers on OK and has no other issues except the following:
                      • CAPS LOCK does not work at all
                      • Fn button toggles Flight Mode
                      • When I press 't' or '5', it produces 't5', and when I press 'y' or '6', it produces 'y6'
                      • (with SHIFT pressed: 't%' and 'y^' respectively)
                      I initially thought it was a keyboard malfunction (internal short, etc.),
                      but when I press and hold...
                      06-27-2025, 01:10 AM
                    • Simone Vergani
                      Alienware 15 R2 Service Tag: DL7NN32 ISSUE (Battery is not charging)
                      by Simone Vergani
                      Hello everyone,

                      I'm experiencing an issue with my Alienware 15 R2 (Service Tag: DL7NN32). The laptop works perfectly when connected to the AC adapter — it powers on and functions normally. However, the battery does not charge. If I disconnect the DC adapter, the laptop shuts down immediately, as the battery is at 0%. I have replaced the battery with a new compatible one, but the issue persists. I also replaced the AC adapter with a compatible one, but the battery still doesn't charge.

                      To assist with troubleshooting, I'm attaching two power circuit schematics:
                      • Power
                      ...
                      03-05-2025, 02:25 PM
                    • wizard13
                      Dynabook Satellite Pro C50D-B-100 - BIOS Issue, Black Screen
                      by wizard13
                      Hello everyone,

                      I am experiencing a BIOS-related issue with my Dynabook Satellite Pro C50D-B-100. When I power on the laptop, the screen stays black, and there is no response from the system. I suspect a corrupted BIOS.

                      I have checked the forum and the available documentation but could not find a solution specific to my issue.
                      • Brand & Model: Dynabook Satellite Pro C50D-B-100
                      • Part Number (P/N): PYU13E-00C00PFR
                      • Serial Number (S/N): 22028896H
                      • System Configuration (SC): A1PYU13E1127
                      • Motherboard Model: IP3_ACN16_MB_V21_20211222A
                      • Power Input: DC 19V –
                      ...
                      02-28-2025, 02:43 AM
                    • Loading...
                    • No more items.
                    Working...