Nintendo Switch Lite Missing Components

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • spiderspore
    Member
    • Jan 2022
    • 47
    • Ireland

    #1

    Nintendo Switch Lite Missing Components

    Anyone help with these Missing Components. Sorry there are so many
    Attached Files
  • Technomancer
    Member
    • Nov 2021
    • 20
    • United States

    #2
    Re: Nintendo Switch Lite Missing Components

    Looks like you got someone's donor board there with that many missing components. If it was a donor board, its probably dead for a reason you aren't likely to be able to fix.

    Comment

    • spiderspore
      Member
      • Jan 2022
      • 47
      • Ireland

      #3
      Re: Nintendo Switch Lite Missing Components

      was gonna rebuild it for practice maybe it will work, have another few boards that are missing components as well so i just put them all in the same pic

      priority ones are below if anyone can help
      front of board 1,2,3,8,9,12,13
      back of board 1

      Comment

      Related Topics

      Collapse

      • Tomylee
        No LCD image after connector replacement – lifted components and damaged resistor (Nintendo Switch Lite HDH-CPU-02)
        by Tomylee
        Hi everyone,

        Sorry for the person who’s going to read all this !
        I'm on a Nintendo Switch Lite, motherboard HDH-CPU-02.

        While replacing the left joystick, I had to remove the motherboard to access the connector underneath. When I lifted the LCD connector latch, it broke (the plastic had become brittle over time), so I replaced the entire connector.

        During the desoldering of the LCD connector using hot air, three small components located just below the connector (likely 0402 capacitors) came off and remained stuck to the bottom of the...
        07-11-2025, 11:52 AM
      • fab13
        Nintendo Switch lite charging chip heats up and does not short circuit
        by fab13
        Hello everyone


        Small technical problem on a Nintendo Switch lite
        Here's what I noticed: the USB port has been damaged internally, with a short circuit on the power supply line to the small fuse.

        After replacing the USB connector, the short circuit went away and I can't see any other short circuit in the whole motherboard.

        When I charge the console, it seems to be charging: I get 15 volts and an amperage of 0.450 A.

        Then, after a while, the amperage increases to 1.1 A and the BQ24193 charging chip starts to heat up, as evidenced...
        09-16-2023, 04:59 AM
      • Yolofolkss
        Huawei D14 dah98ambad0 rev d please help identify Missing components
        by Yolofolkss
        Huawei D14 dah98ambad0 rev d please help identify Missing components

        Hello I just bought this laptop to be used personally (that I'm currently trying to repair.), I am aware that liquid (gravy) has been spilled in this area before. but there are missing components it it possible to have a board view or a schematic of this? or just an idea on what components its missing?

        as far as I know this parts are connected as sense or enable.... that's how far I know...

        Images attached:
        the picture of the area. and some of the pinouts that I noticed on the chip...
        03-26-2023, 12:37 AM
      • Artakozu
        Xfx RX470 - Missing components
        by Artakozu
        Hi, I'm new to this forum.
        I recently bought a damaged XFX RX470 for around $10-12 USD. As you can probably see, I believe the only issue is some missing components, likely due to a scratch or a fall.
        Can anyone help me confirm which components are missing, and specifically, tell me the value of capacitor C502?...
        05-20-2025, 06:26 PM
      • summerwhite
        DJI Mini Pro 3 missing components near camera connector
        by summerwhite
        I have a DJI drone that is not displaying a video feed anymore after a repair.

        When tearing down the DJI drone to fix the armature there was some hot glue next to the camera connector that i had to remove.

        Now there are missing components either because they got pulled off or because they where never placed.

        I have two reference images from XXZ and a photo of mine.

        I'm truely hoping someone has another DJI Mini Pro 3 that they can help me identify what these components are and if they are necessary.

        On the board view from XXZ they...
        04-06-2025, 11:15 PM
      • Loading...
      • No more items.
      Working...