Coffee Machine - YAY! I've blown my first capacitor (and a tip or two from a Newbie!)

[budm]

Re: Coffee Machine - YAY! I've blown my first capacitor (and a tip or two from a Newb

Please see if it looks correct now, thanks.

[Rhothgar]

Re: Coffee Machine - YAY! I've blown my first capacitor (and a tip or two from a Newb

This is what I can tell based on the pictures.

I feel like a spare part here! No pun intended.

Where you are marking true? on the virtual PCB (very impressive by the way), are you asking for me to check something?

It will probably be the weekend before I can strip it out again.

Did you use the photos that I had uploaded to Dropbox in the end?

[Rhothgar]

Re: Coffee Machine - YAY! I've blown my first capacitor (and a tip or two from a Newb

I have found a diode which is showing .375 in circuit both ways.

All the others are showing 0.62 or thereabouts in circuit and OL in other direction.

The diode D1 is copper coloured looking. Is this a Zener diode? It is tiny! How can I find out what specification it is please?

Sorry Guys. Just realised please totally ignore this comment about D1. It refers to the milk frother that comes with the coffee machine!!!!!

[vinceroger69]

Re: Coffee Machine - YAY! I've blown my first capacitor (and a tip or two from a Newb

Yes i think budm needs you to double check if the points hes marked true? is where hes the circuit actually runs etc just to make sure his drawings are correct and match the board layout.

[Rhothgar]

Re: Coffee Machine - YAY! I've blown my first capacitor (and a tip or two from a Newb

The Blue rectangular X/Y cap, do each one of the legs connected to Line and Neutral? That cap looks to be connected in parallel with the MOV.
That big Metal Oxide resistor (Red, ?,?,? bands) looks to be for dropping resistor and looks like it got hot, D1 is the rectifier for generating DC for the running the circuit.
Is the Lytics brown cap (c?) next to C5 rated at 2.2uF 400VDC also?

Yes C5 and C8 are both 400V 2.2uF Manufacturer KT with a dot in between the letters. Other markings: RL13C PET

Metal Oxide resistor? Is that the one with the grey base or blue base?

[vinceroger69]

Re: Coffee Machine - YAY! I've blown my first capacitor (and a tip or two from a Newb

Yes C5 and C8 are both 400V 2.2uF Manufacturer KT with a dot in between the letters. Other markings: RL13C PET

Metal Oxide resistor? Is that the one with the grey base or blue base?

grey base one.

[Rhothgar]

Re: Coffee Machine - YAY! I've blown my first capacitor (and a tip or two from a Newb

This is what I can tell based on the pictures.

budm

You know where you have questioned TRUE? between 47 Resistor and other resistor which is the grey metal oxide one (I assume), do you want me to check continuity here?

Is that what you are asking? I am very new to all this so need to understand what is being asked of me.

Also, what are you using to markup because I need to mark up your edited PCB photo. I am on a mac and I am not that familiar with the highlighter in preview - it is very slow and tedious to use!

I can switch to a PC if necessary if there is a good markup programme?

[budm]

Re: Coffee Machine - YAY! I've blown my first capacitor (and a tip or two from a Newb

budm

You know where you have questioned TRUE? between 47 Resistor and other resistor which is the grey metal oxide one (I assume), do you want me to check continuity here?

Is that what you are asking? I am very new to all this so need to understand what is being asked of me.

Also, what are you using to markup because I need to mark up your edited PCB photo. I am on a mac and I am not that familiar with the highlighter in preview - it is very slow and tedious to use!

I can switch to a PC if necessary if there is a good markup programme?

That is correct, just to verify that those connection are made based on what I can see from the pictures.
So is it working or it still has shorted rectifier D1?
The big gray resistor looks like it got hot and I cannot tell what the color bands are.
I use the pictures from post #1 and scale them so the top and bottom are the same size to make the virtual PCBA.
Double sided boards are hard to trace the connections using the pictures that is why I put 'TRUE?' there.
I use PAINT.net on my PC.

[Rhothgar]

Re: Coffee Machine - YAY! I've blown my first capacitor (and a tip or two from a Newb

So is it working or it still has shorted rectifier D1?

Please refer back to my Post 23!

[budm]

Re: Coffee Machine - YAY! I've blown my first capacitor (and a tip or two from a Newb

"It refers to the milk frother that comes with the coffee machine!!!!!" Sorry but I did not understand what the 'milk frother' is in relation to D1.

[Rhothgar]

Re: Coffee Machine - YAY! I've blown my first capacitor (and a tip or two from a Newb

"It refers to the milk frother that comes with the coffee machine!!!!!" Sorry but I did not understand what the 'milk frother' is in relation to D1.

It's another problem I have with the milk frother which is a separate piece of kit on the machine. It has a kettle type connector and I had accidentally commented about D1 on that PCB and then later realised that I have not done a post about that PCB.

So I didn't want to confuse but ended up doing so because you didn't have the full picture.

I'll check D1 on this board which someone rightly said is a GS1M and report back.

Just really busy at the moment so may take some time to update.

Thanks for everyone's help on this so far.