ICOM IC-M423G(E)

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • slackie
    New Member
    • Jan 2023
    • 4
    • Sweden
    #1

    ICOM IC-M423G(E)

    Hi all,

    Not sure if this qualifies as a weird device. I am simply looking for a firmware/EEPROM dump of an ICOM marine VHF transceiver. Mine is MMSI programmed and I'm trying decode and identify bits to clear/change the MMSI.
    Tags: None
    • stj
      Great Sage 齊天大聖
      • Dec 2009
      • 31070
      • Albion
      #2
      probably easier to look for CS-M92D Programming Software .
      i dont know what the cables have in them though.

        Comment

        • slackie
          New Member
          • Jan 2023
          • 4
          • Sweden
          #3
          Thanks! It's actually managed by the CS-424A software which I have obtained. I am waiting for the cables (OPC-484) to arrive which is two months away.

            Comment

            • stj
              Great Sage 齊天大聖
              • Dec 2009
              • 31070
              • Albion
              #4
              the cable into the radio is just serial TX & RX @5v or 3.3v but i dont know the pinout

                Comment

                • slackie
                  New Member
                  • Jan 2023
                  • 4
                  • Sweden
                  #5
                  Found the pin-out and managed to reprogram it using their proprietary software. I also made EEPROM dump prior and after the MMSI removal so I have the delta on what bits to change if anyone is interested.

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • Uranium-235
                      IR to USB transceiver for HDMI video adapter
                      by Uranium-235
                      Ok, so for a customer of mine, he got a wonderfully built NVR from SCW. I also had to get him this

                      https://www.amazon.com/HDMI-Extender.../dp/B08778V33N

                      I used the remote on the NVR totally and it's horrible. Totally non-intuitive. I would rather have him use a pointer mouse.

                      but that has kind of sailed the ship

                      Is there any ways I can just funnel a USB signal through IR pass on the receiver, and hook the other side (transceiver and hook it to the other transmitter) and convert that to a USB signal for the USB port...
                      08-29-2021, 02:59 AM
                    • alberto79
                      Icom PS-15 power supply
                      by alberto79
                      Hi!
                      I have an old (but good) Icom PS-15 power supply.
                      This PSU was modified by a technical and now the original control circuit is no longer there.
                      I want to make the original circuit because the modified circuit don't work fine.

                      The original circuit use an old components and i need help to find (if possible) equivalent (but modern) components.

                      The first components is U05, rectifier/filter.
                      The second is XZ-051, reference voltage.






                      Thank you for help.

                      Alberto...
                      04-19-2021, 08:38 AM
                    • mpikou
                      EC300 Marine Control Board schematic
                      by mpikou
                      Hello,

                      I am looking for EC300 Marine Control Board schematic.

                      Thanks
                      12-11-2020, 09:00 AM
                    • 24mech
                      Jecod DCS3000 marine 24v pump
                      by 24mech
                      Hi everyone, I know this may be a long shot, I'm looking for some help with the 24 volt power supply for my marine return water pump. the issue I have is the controller thinks the pump has a blockage so it wont power up the pump, what I'm hoping I can do is fool the power supply into thinking the pump is ready to run, I can't find any info on repairing this controller online, can anyone help?
                      07-26-2020, 02:33 PM
                    • llonen
                      Yaesu FT726R Transceiver
                      by llonen
                      So this came into the workshop recently for repair, sadly as per the norm I don't have pics of the current state of the ongoing repair, if I remember to when next working on this I might take some only due to the wide extent of the damage. Customer report not working no transmit no audio, bench report no audio (speaker disconnected ?) transmit sometimes, receive mostly but anything up-to 500kc off frequency random.

                      Further findings were either full output power and or little to no output power, VFO unit PB-2445 not setting up as per service manual specifications. I had a source...
                      09-25-2019, 08:09 AM
                    • Loading...
                    • No more items.
                    Working...