Smd Capacitor lost in PS4 Fat CUH 1215a - Hdmi Line

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Pakamalu Flia
    LittleStick
    • Feb 2024
    • 9
    • Argentina

    #1

    Smd Capacitor lost in PS4 Fat CUH 1215a - Hdmi Line

    Good morning team
    I turn to you for help. A client brought me a Ps4 fat model CUH1215a.
    Motherboard model: SAC 00-1 1-980-066-31.

    Click image for larger version

Name:	20240802_130904.jpg
Views:	275
Size:	1.62 MB
ID:	3321308

    Diagnosis: The customer mentioned that the PS4 fell on the floor while his children were playing.
    It turns on but does not give an image.
    Power Supply: Ok -5 and 12 v line
    The HDMI connector and its solders were checked. Everything ok.
    Visual inspection of the motherboard shows the existence of a capacitor? absent in this part of the mother


    Click image for larger version

Name:	20240802_130934.jpg
Views:	287
Size:	2.17 MB
ID:	3321309

    Click image for larger version

Name:	20240731_173906.jpg
Views:	283
Size:	1.07 MB
ID:	3321310
    My question is, will anyone have a schematic or a similar plate to check the nominal value of the capacitor that blew up.
    The capacitors that are close to this have a value of 315 uf. This is for reference only.
    Thanks for your help..
    Greetings from Argentina​
    Attached Files
  • Samsir
    Member
    • May 2020
    • 15
    • Bosnia

    #2
    Hi,
    This Cap is a 0805 20uf.
    Cheers

    Comment

    • Pakamalu Flia
      LittleStick
      • Feb 2024
      • 9
      • Argentina

      #3
      Originally posted by Samsir
      Hi,
      This Cap is a 0805 20uf.
      Cheers
      Hooo thanx man.
      BTW i only found a 40uf cap.. It´s compatible?

      Comment

      • Samsir
        Member
        • May 2020
        • 15
        • Bosnia

        #4
        I would spend a little time searching for around 20uf +- 20%. You can use a 1206 size if you have.
        Check on some donor boards or Caps from other scrap electronics..
        Not sure how the chip on the PS4 will react if you put on a 40uf. It might work, for a while, but I wouldn’t do it. If it’s a customer’s PS4, you only risk getting it in return with potentially bigger damages.
        ​​​​​​…

        Comment

        • Benass
          Senior Member
          • Oct 2020
          • 73
          • Uk

          #5
          This is unrelated but might help you make a decision.

          I had small cap missing on ps5 HDMI port. So i installed the smallest one i had but clearly bigger then it supose to be. unfortunately bigger cap affected display, i was getting blue snow dots and ps5 was displaying only in low resolution. i had to remove that cap. ps5 worked flawlessly without it.

          Sometimes bigger caps maks no difference, but sometimes it can backfire. the one needs to know the reason for that part.

          Comment

          • Pakamalu Flia
            LittleStick
            • Feb 2024
            • 9
            • Argentina

            #6
            Ok, Thanx for all.
            I still can't get the right capacitor-
            I'll keep looking at some other mothers..​

            Comment

            • RotteNova383
              New Member
              • Aug 2024
              • 3
              • USA

              #7
              You don't NEED that cap. It's just a filter, but I've gone without it when I started working on ps5 and didn't have access to them.. So if you lose it, not a big deal.

              Comment

              Related Topics

              Collapse

              • “Eabdel”
                Broken capacitor and the PCIE line on RTX 3090 FE
                by “Eabdel”
                Hello,
                I have a RTX 3090 Founders Edition and it's detected as PCIE X4 instead of X16
                I took a look to the PCB and found that a capacitor, wich is linked to and the PCIE fingers lines, is broken. I count and it's on the 32 position (exactely the end of the PCIEX4)
                Anyone knows this capacitor specification? I see some other models boardview and seems to be linked to the ground
                Can I just solder the trace between them with no capacitor or it's risky?
                Thanks...
                04-10-2024, 08:00 AM
              • ktmmotocross
                HP Omen 17-an108nc - 3long and 2 short/memory error/ after capacitor short on 5V line
                by ktmmotocross
                Hello.
                I have this HP Omen 17-an108nc that show 3long and 2 short/memory error/ led blinks on Caps-lock after capacitor short on 5V line.

                Come with one shorted capacitor on 5V line. After replce it just blinks memory error. i flash main and EC bios but still the same. I have all voltages on start, cpu fan spining, but onli capslock blinks and no picture

                any hint?
                01-03-2023, 06:07 AM
              • Eniaro
                PS5 HDMI capacitor
                by Eniaro
                There's a capacitor located directly behind the HDMI port that seems to get knocked off whenever the HDMI port gets damaged
                does anyone know the correct value of this cap

                eBay says
                100nf/ 0.1uf 16v 0201 Capacitor SMD

                iFixit & Reddit
                0201 0.1UF 10V

                iFixit and Reddit posts, reference their source to kasynparts
                11-06-2022, 04:20 PM
              • aliougm
                Marantz SR4003 AVR HDMI board issue, seeking for help
                by aliougm
                I have problem with my AVR(Marantz SR4003) HDMI board issue. I connect to my TV but screen color distorted,see attached picture.

                Connection as below:
                Set-top box HDMI output >AVR 3 HDMI input/one HDMI output>HDTV HDMI port
                If I bypassed AVR then HDTV screen color be good.

                I take out HDMI board from AVR and check services manual the schematic shown the HDMI signals path:
                3 HDMI input port > SIL9185 chip(HDMI switch) > SIL9033 chip(HDMI receiver) > SIL9030 chip(HDMI transmitter) > HDMI output port

                I replaced all...
                04-30-2022, 12:21 PM
              • Prolog
                RTX 3080 FE Identifying capacitor
                by Prolog
                Hi people, I hope this is the correct spot to post this, I'm new to the forum.

                I have an RTX 3080 Founders Edition which has a burnt up capacitor (it was in parallel with another capacitor which appears damaged too), so I am hoping to be able to identify the capacitor values and order replacements.

                I hope these photos make it clear which component I am referring to:
                (yes, the soldering is a bit botched from removing the blown one, I know)

                I have found the board schematic (attached), but there does not seem to be a boardview available. I have never...
                12-01-2024, 08:27 PM
              • Loading...
              • No more items.
              Working...