PS5 BLOD- CFI-1115A Disc Version- Board= EDM-020

Collapse
X
Collapse
 
  • Page of 7
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 4 5 6 7 template Next
  • TheWizard
    Senior Member
    • Feb 2015
    • 190
    • United States
    #121
    Update on this one. Connected UART and I am showing an error of 80000140: APU Freeze (No Response) - GDDR6 Data Line Issue (Replace). Thermal camera showed RAM module 6 not lighting up. Reballed the module and reseated. No change. I then replaced the module with a known good. Still received no change. What makes up this data line besides the APU and the RAM?
    ​

      Comment

      • TheWizard
        Senior Member
        • Feb 2015
        • 190
        • United States
        #122
        Just an update on this one. This ended up being a bad APU. I re- balled and reseated the APU but it was too far gone.

          Comment

          Previous 1 2 3 4 5 6 7 template Next

          Related Topics

          Collapse
          • Tynan Dill
            Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
            by Tynan Dill
            I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

            Upon bringing it home and plugging it up, it showed a standby light.

            I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

            The screen seems to blackout and stay black, but with a flashlight I can see the display.

            With my Playstation 4 connected via HDMI, and running a game I can hear sound.

            Assuming...
            ORIGINAL POWER SUPPLY BOARD
            7 Photos
            11-22-2024, 01:46 PM
          • m1ch43lzm
            HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
            by m1ch43lzm
            Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
            Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
            05-12-2025, 08:37 PM
          • Junior††
            PS5 Disc Not Supported/ Disc Not Recognized Board Num: EDM-020
            by Junior††


            Good Afternoon fellas,

            Issue:
            Disc is showing as not supported when a disc is put in.

            Here's what I've done, you can skip this if you just wanna know the question:
            - replaced with a disc drive from a donor ps5 (honestly questionable if this is known to work)
            - reflowed the disc drive connector
            -reflowed the chip in question (shown on image)
            - I will say this console was very dusty so it's conceivable that it got so hot that it made the chip joints cold and potentially other things on the board

            Question:
            I...
            02-19-2025, 12:48 PM
          • howardc64
            TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board
            by howardc64
            All left and right refers to looking from rear of TV (or looking from front with TV upside down)
            • TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
            • Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
            ...
            07-24-2025, 05:17 PM
          • Hakuu
            LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
            by Hakuu
            Hi There,

            This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

            After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

            More Details

            TV Model - LG OLED77G1PUA

            Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
            07-12-2023, 02:37 PM
          • Loading...
          • No more items.
          Working...