B85m-e rev 1.02 chassis intrude error

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • OKRPKCOMP
    Badcaps Veteran
    • Dec 2020
    • 429
    • PAKISTAN

    #1

    B85m-e rev 1.02 chassis intrude error

    Asus board B85M-E bios is ok, motherboard is ok, everything is fine but i am facing this error at startup
    Chassis intrude,pls check yours system
    Fatal error, system halted
    Remember, there is nothing in bios setup to disable chassis error. Anybody can help me to solve this prob
    Thanks in advance
    Attached Files
    Last edited by OKRPKCOMP; 07-20-2022, 11:01 AM.
  • OKRPKCOMP
    Badcaps Veteran
    • Dec 2020
    • 429
    • PAKISTAN

    #2
    Re: B85m-e rev 1.02 chassis intrude error

    Comment

    • hoaca388
      Badcaps
      • Jan 2022
      • 11161
      • Viet Nam

      #3
      Re: B85m-e rev 1.02 chassis intrude error

      Asus B85M-E
      Attached Files


      -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
      Mọi khoản quyên góp cho Badcaps đều được hoan nghênh . Trở thành người ủng hộ Badcaps >>>>> nhấp vào liên kết này để quyên góp <<<<< Cảm ơn tất cả những người ủng hộ . -------------------------------------------------------------------------------------------------------------------------------------------------------------

      Comment

      • OKRPKCOMP
        Badcaps Veteran
        • Dec 2020
        • 429
        • PAKISTAN

        #4
        Re: B85m-e rev 1.02 chassis intrude error

        Originally posted by hoaca388
        Asus B85M-E
        Sir its only new bios from site, which i already have and tried it
        I need to remove chassis error
        Can u edit bios that it wouldnt show chassis error????

        Comment

        • hoaca388
          Badcaps
          • Jan 2022
          • 11161
          • Viet Nam

          #5
          Re: B85m-e rev 1.02 chassis intrude error

          No, i don't think that's bios error.


          -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
          Mọi khoản quyên góp cho Badcaps đều được hoan nghênh . Trở thành người ủng hộ Badcaps >>>>> nhấp vào liên kết này để quyên góp <<<<< Cảm ơn tất cả những người ủng hộ . -------------------------------------------------------------------------------------------------------------------------------------------------------------

          Comment

          • OKRPKCOMP
            Badcaps Veteran
            • Dec 2020
            • 429
            • PAKISTAN

            #6
            Re: B85m-e rev 1.02 chassis intrude error

            Originally posted by hoaca388
            No, i don't think that's bios error.
            Sir, u r rite, its not a bios error
            but this error can be disable in bios

            Comment

            • SMDFlea
              Super Moderator
              • Jan 2018
              • 20300
              • UK

              #7
              Re: B85m-e rev 1.02 chassis intrude error

              Originally posted by OKRPKCOMP
              Sir, u r rite, its not a bios error
              but this error can be disable in bios
              It isn`t a bios problem,it could be a bad transistor,its next to the blue jumper.

              A similar problem on an old asus board here https://www.badcaps.net/forum/showthread.php?t=32502
              All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

              Comment

              • OKRPKCOMP
                Badcaps Veteran
                • Dec 2020
                • 429
                • PAKISTAN

                #8
                Re: B85m-e rev 1.02 chassis intrude error

                Problem solved
                There was 3.3 volt missing from chassis jumper to nearly existence 10k

                Comment

                Related Topics

                Collapse

                • Sus256
                  HISENSE 65E7KQ PRO - no boot
                  by Sus256
                  Hi all!

                  HISENSE 65E7KQ PRO
                  RSAG7.820.13512 - chassis
                  MT9618BAATAB - cpu
                  RSAG7.820.12059 - power
                  HD650Y3U77 - panel
                  KLM8G1GETF - emmc

                  The TV does not turn on, the standby indicator is on. All voltages are present.
                  Emms is dead. Not readable, not detected.
                  Replaced emmc.
                  But with another dump there is no launch

                  Terminal log

                  UART
                  <
                  AC_ON
                  RPMB key is not yet programmed

                  HASH1_VERSION=0x00000000 64bit
                  E-B
                  FDE enabled
                  layout pattern onebin by SAR7,0...
                  06-01-2025, 02:11 AM
                • cheeky2
                  Sony RB2G Chassis KDL-55W815B MAIN BOARD 2 Blink Error issue resolved! Happy days :)
                  by cheeky2
                  For anyone interested just repaired this Sony Main board TV that had a 2 blink error code, the chassis is a RB2G which is common to quite a few different Sony models. The Ceramic 10uF 25V X7R 1206 capacitor C9114 was shorted which took the smd 2A 0603 fuse out F9101. This was powering the Buck converter TPS54332 which caused no 5V output from it.
                  See the attached picture of the locations of both components. I also attach the best service manual I found for this board for anyone else in a similar position of trying to repair this main board. It's not specific to the TV model however it gives...
                  01-08-2024, 05:56 AM
                • Superbee_dad
                  Sharp 80” long short flash backlight error - Help
                  by Superbee_dad
                  Hello Sharp TV experts
                  Our Sharp LC-80LE642U displays one short one long flash error code which is a backlight error. I went into service mode and there were 8 lamp error counts recorded. I reset the count to 0 and did a reset. The last monitor error cause was 16 B00014639:12. 16 is the code for backlight error. I tried to power the tv up but went back into error mode.

                  > I checked voltages on the power supply board and they all check out .. including 3.28 volts at the error pin.
                  > There is power to the cpu and T-CONN and no faults found there. The cpu has a flashing...
                  01-24-2025, 11:51 PM
                • medinfo
                  Mac T2 after update(There was an error activating your device)
                  by medinfo
                  Macbook Pro 2019 T2
                  iCloud OFF
                  MDM unlocked by changing Serial Number
                  worked fine but after latest update see (There was an error activating your device. Please try again).
                  Erased and boot in internet recovery, same error.
                  changed to original serial number (iCloud OFF & MDM ON), same error.
                  tested with others serial number, same error.
                  tested (CMD+R), (Option+CMD+R), (Shift+Option+CMD+R), same error
                  Revived and restored by Apple Configurator and same error.

                  Any help ?
                  12-31-2023, 02:04 PM
                • rmjimenez455@gmail.com
                  Sumsour station 8586D error H-E
                  by rmjimenez455@gmail.com
                  Hello everyone, next I have the following problem with the Sumsour 8586D 110v dual station I bought it a year ago and it worked wonderfully, now it presents the H-E error on the soldering iron side, the hot air side works correctly..... I disassembled the soldering iron head because the manual tells me that this error is due to ceramic resistance problems, in effect, I measured it and it is open, I bought a new one that is working verified in a soldering iron and nothing.... The same error continues, I proceeded to open the station and check visually, I found a totally damaged 1R00 surface mount...
                  09-07-2024, 09:33 AM
                • Loading...
                • No more items.
                Working...