Hello, I need bios bin file for Asrock z87 Extreme3 Rev. G/A 1.05
-
-
Re: Bios Asrock Z87 Extreme3 Rev. G/A 1.05
Go to the support page,download the "Instant Flash" bios version. Extract the 8,196KB bios then open the bios with UEFITool,right click,select "extract body" .That will remove the 4KB header leaving you with the full 8,192KB bios .
https://www.asrock.com/mb/intel/Z87%20Extreme3/#BIOS
https://github.com/LongSoft/UEFITool..._A57_win32.zip
.Attached FilesLast edited by SMDFlea; 07-31-2020, 02:31 AM. -
-
Re: Bios Asrock Z87 Extreme3 Rev. G/A 1.05
try and repComment
-
Re: Bios Asrock Z87 Extreme3 Rev. G/A 1.05
Hello. i did as you advised SMDFlea, now this motherboard is working fine, thanks a lot peopleComment
-
Hello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
07-24-2025, 02:17 PM -
Hello everyone,
I’m looking for a full raw 16 MB BIOS dump for an ASRock Z790-CX (DDR5) motherboard.
The board powers on (fans spin, RGB lights on, RAM LEDs active), but there is no display output and the VGA and BOOT LEDs stay lit.
I’m using an Intel i9-14900KF CPU (14th gen), and it seems the BIOS version on my board doesn’t support it yet. I tried to flash the official ASRock BIOS file (renamed .ROM → .BIN) directly using my RT809H programmer, but it didn’t work — monitor stays on but with black screen, so I believe the ASRock update file is not a complete... -
Hi
I have a very strange issue with the BIOS SPI chip of an ASRock B650M PRO RS motherboard.
The SPI chip is an Winbond 25Q256JWEQ model (1V8).
The motherbaord doas not POST - it lits only CPU and DRAM EZ Debug Leds, and stays that way forever.
The Flashback function of the motherbaord is also not working, despite all instructions followed correctly - I'm 100% sure of this.
I have then desoldered the chip, backupped the contents, and tried to earease the chip in order to program stock image, but the chip is locked by status registers SREG2 (TB) and SREG6... -
Hi. I am not too up on installing BIOS so am looking for a little direction installing a BIOS update.
https://www.asrock.com/MB/AMD/AB350%...index.asp#BIOS
I have an ASROCK AB350 Pro4 that is running a P3.00 BIOS.
CPU is AMD Ryzen5 1500X which I believe is a "Summit Ridge."
Before I go ahead and update it to the latest version, I thought I would ask whether my plan is right to try and be sure I don't make a mess of things.
It appears that the latest BIOS for this chip is the 5.80; therefore I need to install (one at a time)…
... -
I'm trying to extract a flashable bios file(ch341a) from the lenovo bios executable download. I have tried the instructions from this site https://starkeblog.com/lenovo/uefi/2...pdate-exe.html, which are not working. According to those instructions, after issuing the commandit should create an \app folder, inside which, I should find a newly created "7wcn38ww.exe" file. I should then be able to extract that using 7zip and find my .FD file.Code:
"innoextract 7wcn38ww.exe"
The trouble I'm having is that I'm not getting the newly...
Comment