Re: Bios needed HP 290 G2
Did you tried bios at post#6?? thats a virgin bios posted by me which should work.
-
Re: Bios needed HP 290 G2
What else could be problem , motherboard boots in recovery mode but
it seems cant recognize recovery usb created from original bios update.Attached FilesLeave a comment:
-
-
Re: Bios needed HP 290 G2
Hp virgin bios for your model. If this doesnt work, problem may not be bios.Leave a comment:
-
Re: Bios needed HP 290 G2
Same thing , motherboard powers up and shuts down after few seconds.
i also tried move onboard jumper to BBR#, after that i get blinking led on
power button , 2 long 2 short , according to HP codes thats bios failure.Leave a comment:
-
Leave a comment:
-
Re: Bios needed HP 290 G2
here is original bios and i tried clear ME but intel ME/TXE injector does not work.Attached FilesLeave a comment:
-
-
Bios needed HP 290 G2
hi,
i need bios for desktop pc hp 290 G2 , motherboard
Linc 17514-1 Rev. A
348.0A861.0011
Thank you
-
My pc updated bios through Windows Update and I was greeted with BLACK SCREEN WITH CPU FAN MAX SPEED. I don't think there is even a screen signal, because it triggers my monitor for a couple seconds and then the monitor turns off. I tried the other outputs as well.- I tried clearing bios, resetting bios, removed the CMOS battery, removed m.2 ssd, wifi, and ram. Still black screen with CPU fan blasting.
- I tried using the Lenovo BIOS CD and BIOS USB, but neither worked. At least I couldn't get anything to work.
- I could only locate two chips that look like bios chips. Could someone verify this
-
Sublect line continuation: ... Jaguar IDS PC aka Panasonic
>Read BIOS guides, methods, resources and tools
>
Ack
>Try the method at BIOS guides, methods, resources and tools before requesting help
>
Ack
>Explain you were not able to succeed with the methods at BIOS guides, methods, resources and tools
>
python ./main.py "/mnt/c/temp/205605f9e1b60403a41787efeffe9cad-flas_maybe5.BIN" --output-dir "/mnt/c/temp/205605f9e1b60403a41787efeffe9cad-flas_maybe5.txt"
------------------------------------------------... -
Hello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
07-24-2025, 02:17 PM -
Hello there.
I am working on a Lenovo Legion T5-26AMR5 desktop that currently has a corrupt BIOS and I have been unsuccessful thus far in trying to fix it myself.
History:
1. This computer came to me initially with an error message that said "BiInitializeLibrary failed 0xc0000001" or "0135 fan error". It would always be one of the two errors. It should be noted that when it produced the fan error, there was no physical problem with the fans. They were all spinning just fine.
I searched for this error online and discovered... -
Hi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).
I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...11-17-2023, 10:56 AM
Leave a comment: