Hello all, I know it's a desktop, but this forum is way more active than the others. Motherboard is DH57M01. Thank you.
-
-
Re: BIOS dump for Studio XPS 8100
s8100-a05 -
Re: BIOS dump for Studio XPS 8100
Thank you, but that's not the full dump, it's 8MB, I already have that file from Dell downloads.Comment
-
Re: BIOS dump for Studio XPS 8100
I did it, I copied over the data with HxD finding matching offsets. Version got updated to A05. I attach dump for future reference, Service Tag field is empty.Comment
-
Re: BIOS dump for Studio XPS 8100
orientalsniper
Thank you, Thank you, Thank you, Thank you, Thank you and many more thanks.
the file you uploaded above saved my xps 8100 from the scrap heap or at least saved me from having to buy a new board after a bad flash
the bad flash itself was probably caused by the two bulging 470uf capacitors I found positioned between the cpu and the pcie slot.
all fixed now
Thanks again.
DarcyComment
-
Re: BIOS dump for Studio XPS 8100
I managed to extract and mod the A05 bios for the Studio XPS 8100, but I can't get it to write to the motherboard.
How do you write a modded BIOS to this system?
Thanks.Comment
-
Re: BIOS dump for Studio XPS 8100
Hi. Help pls with bios dump for XPS 8300 , DH67M01 mobo.Comment
-
Re: BIOS dump for Studio XPS 8100
Hi. Help me please bios dump xps 8300 dh67m01 4mbComment
-
Comment
-
Re: BIOS dump for Studio XPS 8100
my bios with bad updates
this is ori from dell web siteComment
-
Re: BIOS dump for Studio XPS 8100
thanks
reserve bad update
6502 from dell web siteLast edited by chaker752000; 09-03-2018, 07:26 AM.Comment
-
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
Hi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).
I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...11-17-2023, 10:56 AM -
This laptop is the same laptop I was working on in this thread and I wasn't sure if I should post a new topic or post in that thread because I already solved the issue that thread was discussing and this is a completely different issue although it is dealing with the same laptop. I decided to make a new thread since it's a new issue, but please move if I made a mistake.
Motherboard model number: DA0PAMB46A1 REV: A
Secondary motherboard model number: 0PAB
SKU: 685K4UA
Serial number is: 5CD3223BJP
Recently reflashed this laptop with latest BIOS and once... -
Hi,
I need a BIOS dump for MSI Z590 PRO WIFI from a real physical board, along with MAC address and serial no.
It must be a dump from a physical board, as it contains personalized data eg. MAC Address, UUID, Serial no.
I have a board which has lost the BIOS contents, I have the MAC and serial to this board, and need to insert it into the another BIOS image. To do it, I need to have a real image from a real board, as the images from the MSI site are without this data. The only way to find where MAC/UUID/Serial is located in the BIOS is to have a bios...11-06-2022, 05:22 PM -
Hi everyone,
I'm trying to recover a Fujitsu Lifebook E5513 (most likely 2023 model) that was bricked during a BIOS update. The update was interrupted (probably due to power loss), and now the laptop is stuck in a boot loop showing "PBB rollback" / "SBB rollback" messages.
BIOS access (F2) and Boot Menu (F12) are no longer possible – the system instantly reboots after the rollback messages.
I extracted the official BIOS update package from Fujitsu (contains FJNB2FD.CAP, ~18.7 MB) and tried tools like UEFIExtract, but it seems to only contain...
Comment