A2115 820-01779-04 replace t 2 Break Activation Lock 1 remove motherboard 2. Remove the hot iron part of the FAN 3. Remove the T2 shield LID 4. Heat insulation with high temperature tape around t 2. 5. T26 with a BGA strip lock. Remove T2 Clean Pad 7. Replant unlocked t 28. On the BGA mark position note not to shift 9. Set up the T210. Install Brush DFU brush T211. Restore the T2 installation system 12. PERFECT REPAIR INTO THE SYSTEM
A2115 820-01779-04 replace t 2 Break Activation Lock
Collapse
X
-
Tags: None
-
Re: A2115 820-01779-04 replace t 2 Break Activation Lock
This process isn't as easy as you see it done in the images.Comment
-
Re: A2115 820-01779-04 replace t 2 Break Activation Lock
The steps is simple replace T2 chip with unlocked one then use Apple Configurator to restore it and voila.
The problem is 1st.Hard work 2nd and most important there is no place to find T2 Chips Locked or Unlocked only from donor boards but who can say if have activation or no.Comment
Related Topics
Collapse
-
by envymHi everyone!
I have a 2018 MacBook Pro (with Sequoia OS) that I've been using for years with no problem. I recently received an M2 MacBook Pro so I'm mostly using it and not the 2018 one, but since a friend of mine needs a computer, I thought I could restore my 2018 and give it brand-new-like to my friend.
I tried using the built-in tool to restore the MacBook (Settings > General > Transfer or restore > Delete) but it got stuck when trying to remove the Find Device configuration (it asked me for the password for my old Apple ID -now I use the same account but...06-27-2025, 08:54 AM -
by ArtMovHi guys, i have a problem , my bios resets disabled overclocking lock setting to enable after reboot, please tell me which function can be responsible for restoring the stock config for this option, loading parameters from nvram and so on, like bios ,protection, from asus. My bios made me angry) Set default parameter to disable in amibcp 5 , doesn't help(
1. I made overclocking lock disabled the default in amibcp
2. I changed the varoffset to the wrong one, but it led to the programmer, it was very tedious and nervous, I really regretted it, my chip is on the back of the...-
Channel: BIOS Requests ONLY!
03-31-2023, 01:30 PM -
-
i bought a use console from ebay fixed it and it has parental lock. seller wasn´t helpful and nintendo either cause they don´t support used devices as they told me per mail. thanks for the bad support here in germany. was totally upset as i read the answer to my mail from 1 week ago.... there was no other way to get rid of that code rather than modding the console cause i didn´t even had the device id as it´s a patched V1 and for getting masterkey on salthax there is the need to type in the device id which was unknown in this case... i did a mistake. after the repair i entered my wlan and...
-
by Kiwi VikingHP Elitebook 855 G8
Product ID:4X5S2PA#ABG
Motherboard M53301-601.
Hi Gurus, I am wondering if someone might be able to help. I purchased recently this used computer that otherwise looks in mint condition. I worked for 1 week, until one morning I shut down the computer using the power off commands in windows. There was no warranty. This was purchased for my teenager for use at school.
When I went to start the computer up in the afternoon, all the keys lit, but the computer didn't POST. Then the next thing I tried (pressing the power button) resulted in only the... -
by dark84Hi. Sorry because my bad english. I bought a receiver (vsx-920). If i plug the unit in the ac outlet, i hear that a relay clicks, hdmi led blinks, after relay click again. Then i power up the unit. Unit is powering on. But if i press any button or rotate input selector or volume on the screen write PANEL LOCK. I able to use the main on/off and the zone on/off. Anything else is PANEL LOCK. I have remote, but no reaction from unit if i press any button on remote. Yet i searched internet and found a software or via telnet i am able to disable the key lock and the remote lock. But to use software...
-
Channel: Troubleshooting Audio Equipment
-
- Loading...
- No more items.
Comment