A2115 820-01779-04 replace t 2 Break Activation Lock

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • smzlwan223
    Member
    • Mar 2022
    • 20
    • 中国

    #1

    A2115 820-01779-04 replace t 2 Break Activation Lock

    A2115 820-01779-04 replace t 2 Break Activation Lock 1 remove motherboard 2. Remove the hot iron part of the FAN 3. Remove the T2 shield LID 4. Heat insulation with high temperature tape around t 2. 5. T26 with a BGA strip lock. Remove T2 Clean Pad 7. Replant unlocked t 28. On the BGA mark position note not to shift 9. Set up the T210. Install Brush DFU brush T211. Restore the T2 installation system 12. PERFECT REPAIR INTO THE SYSTEM


































    Attached Files
  • asigasm
    New Member
    • Aug 2022
    • 7
    • Perú

    #2
    Re: A2115 820-01779-04 replace t 2 Break Activation Lock

    does it works for icloud removal? wich tool can i use to unlock t2?
    Last edited by asigasm; 08-19-2022, 06:04 PM.

    Comment

    • curiositymaster
      Member
      • Apr 2021
      • 45
      • Nigeria

      #3
      Re: A2115 820-01779-04 replace t 2 Break Activation Lock

      This process isn't as easy as you see it done in the images.

      Comment

      • asigasm
        New Member
        • Aug 2022
        • 7
        • Perú

        #4
        Re: A2115 820-01779-04 replace t 2 Break Activation Lock

        i hace practice replacing CPU on iphones, i know about reballing process, but i need information for programming t2 chip on imac

        Comment

        • JOHNLAG7
          Member
          • Nov 2014
          • 19
          • Greece

          #5
          Re: A2115 820-01779-04 replace t 2 Break Activation Lock

          The steps is simple replace T2 chip with unlocked one then use Apple Configurator to restore it and voila.
          The problem is 1st.Hard work 2nd and most important there is no place to find T2 Chips Locked or Unlocked only from donor boards but who can say if have activation or no.

          Comment

          • koby058
            Badcaps Veteran
            • Jan 2017
            • 382
            • israel

            #6
            Re: A2115 820-01779-04 replace t 2 Break Activation Lock

            is this hot air or different method ?

            Comment

            • Thomas K
              New Member
              • Jan 2020
              • 5
              • United States

              #7
              Re: A2115 820-01779-04 replace t 2 Break Activation Lock

              Thank you for sharing.

              Comment

              Related Topics

              Collapse

              • envym
                MacBook Pro 2018 with Activation Lock
                by envym
                Hi everyone!

                I have a 2018 MacBook Pro (with Sequoia OS) that I've been using for years with no problem. I recently received an M2 MacBook Pro so I'm mostly using it and not the 2018 one, but since a friend of mine needs a computer, I thought I could restore my 2018 and give it brand-new-like to my friend.

                I tried using the built-in tool to restore the MacBook (Settings > General > Transfer or restore > Delete) but it got stuck when trying to remove the Find Device configuration (it asked me for the password for my old Apple ID -now I use the same account but...
                06-27-2025, 08:54 AM
              • ArtMov
                [HELP] Asus g732lv ami bios overclocking lock reseting after reboot
                by ArtMov
                Hi guys, i have a problem , my bios resets disabled overclocking lock setting to enable after reboot, please tell me which function can be responsible for restoring the stock config for this option, loading parameters from nvram and so on, like bios ,protection, from asus. My bios made me angry) Set default parameter to disable in amibcp 5 , doesn't help(

                1. I made overclocking lock disabled the default in amibcp
                2. I changed the varoffset to the wrong one, but it led to the programmer, it was very tedious and nervous, I really regretted it, my chip is on the back of the...
                03-31-2023, 01:30 PM
              • stormanimal83
                Nintendo Switch picofly installed cause parental lock how to get Master Key for restoring OFW
                by stormanimal83
                i bought a use console from ebay fixed it and it has parental lock. seller wasn´t helpful and nintendo either cause they don´t support used devices as they told me per mail. thanks for the bad support here in germany. was totally upset as i read the answer to my mail from 1 week ago.... there was no other way to get rid of that code rather than modding the console cause i didn´t even had the device id as it´s a patched V1 and for getting masterkey on salthax there is the need to type in the device id which was unknown in this case... i did a mistake. after the repair i entered my wlan and...
                08-04-2024, 01:47 AM
              • Kiwi Viking
                HP Elitebook 855 G8 all of a sudden does not power on. 7 flashes of Caps lock and Number lock prod ID 4X5S2PA#ABG
                by Kiwi Viking
                HP Elitebook 855 G8
                Product ID:4X5S2PA#ABG
                Motherboard M53301-601.

                Hi Gurus, I am wondering if someone might be able to help. I purchased recently this used computer that otherwise looks in mint condition. I worked for 1 week, until one morning I shut down the computer using the power off commands in windows. There was no warranty. This was purchased for my teenager for use at school.
                When I went to start the computer up in the afternoon, all the keys lit, but the computer didn't POST. Then the next thing I tried (pressing the power button) resulted in only the...
                03-01-2025, 01:05 AM
              • dark84
                Pioneer vsx920 lock
                by dark84
                Hi. Sorry because my bad english. I bought a receiver (vsx-920). If i plug the unit in the ac outlet, i hear that a relay clicks, hdmi led blinks, after relay click again. Then i power up the unit. Unit is powering on. But if i press any button or rotate input selector or volume on the screen write PANEL LOCK. I able to use the main on/off and the zone on/off. Anything else is PANEL LOCK. I have remote, but no reaction from unit if i press any button on remote. Yet i searched internet and found a software or via telnet i am able to disable the key lock and the remote lock. But to use software...
                12-13-2021, 08:46 AM
              • Loading...
              • No more items.
              Working...