MSI K7T Turbo 3 recap

[Sudum Gumudu]

Hi all.
I'm going to attempt recapping my two MSI K7t Turbo 3 boards, and has managed to find the following caps from local sources with reasonable shipping costs:

4700uF Rubycon ZLH
2700uF Panasonic FC
1000uF 8x16 Rubycon ZLH
470uF Rubycon ZLH

The 3900:s however is a pain. The original caps are 10V, and are not to be found anywhere, but I've found 6,3V 3900 Sanyo MV-WX from a local supplier. Will that do the job, or do I need the higher 10V spec for those.
If the 6,3V 3900:s are OK, are these an overall acceptable choice? Total cost including shipping $58 for two boards.

TIA
Sudum G

[kc8adu]

Re: MSI K7T Turbo 3 recap

mv-wx should be fine.
the most they will see is vcore.

[willawake]

Re: MSI K7T Turbo 3 recap

does your supplier have a site we can add to the list of places to buy?

[Sudum Gumudu]

Re: MSI K7T Turbo 3 recap

I have ordered the Rubycons from http://www.microkit.se/index.html , but not gotten an order confirmation as of today. The Panasonic FC turned out to be a 12,5mm , and I wanted the 10mm part for a nicer fit. Sanyo MV-WX can be had from www.elfa.se.
2700;s in 10mm size is a bitch to find. Perhaps I'll put my trust in Topcat, and go for the 3900/3300 and 2700/2200 mod instead. 3300:s and 2200:s Sanyo are readily available from Elfa.

Sudum G