Hello.
i need some good tool to test vrams on AMD cards
i hear about Tserver and others. can somebody share this tools?
i need some good tool to test vrams on AMD cards
i hear about Tserver and others. can somebody share this tools?
-
-
Re: VRAM test tols
there`s some good info in another thread https://www.badcaps.net/forum/showthread.php?t=84308
-
hi,
i trying to test vram in rx5700 without results, i use external disk with nvidia and amd vram test tools I found on the internet. any friend who knows more and if I can ran vram test in rx5700?
thanks -
I want to test it with nvida mats for my device mentioned in the title, but I was not successful. As far as I understand, I think I need to make the nvidia graphics card the first card. How can I manage to run vram test on this motherboard?
The error I get is: invalid register specified for this gpu
GPU Nvidia GTX1050 error code 43 -
Hello
I have power adaptor(220V/input, 12V 1.2A/output) which has symptom of fluctuating output DC voltage between 11.5V-12.2V.
So I opened its plastic case and when switched it on, I heard constant tik tik sound from inside its PCB.
I measured DC voltage between negative and positive pin of the largest capacitor(400v 10uf) and it was measured contant 300V.
I also measured ESR value of all capacitors and I noticed that one of capacitor(KMG 16v 470uf), which located in the secondary side, have high ESR value(10 ohm),So I replaced it with same specification NXH capacitor.... -
Nvidia rtx 2060 - MATS shows no errors, but with OCCT Vram test GPU freeze with atefacts
on this card i replace one VRAM chip and card work for 5 days, but now i know some other ram is bad. but how to find bad chip when MATS cannot locate it? -
Hello
I have a big problem and that is that in some cases when repairing active pfc power supplies I cannot work with a test lamp. I can only get help with 5 volts standby and for starting and starting I have to work without a lamp and this way there is a possibility of parts exploding and other parts being added.
Sometimes with a multimeter test the problems can be reduced to some extent, but I had several cases that had to be tested on and online and recently two varistors exploded. They had terrible resistance because the power supplies were over 800 watts.
Is there a way...
Comment